Beko RCNK321K00W Белый [30/44] Installation

Содержание

3 Installation 3 1 Right place for installation Contact the Authorized Service for the product s installation To ready the product for installation see the information in the user guide and make sure the electric and water utilities are as required If not call an electrician and plumber to arrange the utilities as necessary A A A WARNING The manufacturer assumes no responsibility for any damage caused by the work carried out by unauthorized persons WARNING The product s power cable must be unplugged during installation Failure to do so may result in death or serious injuries WARNING If the door span is too narrow for the product to pass remove the door and turn the product sideways if this does not work contact the authorized service Place the product on a flat surface to avoid vibration Place the product at least 30 cm away from the heater stove and similar sources of heat and at least 5 cm away from electric ovens Do not expose the product to direct sunlight or keep in damp environments The product requires adequate air circulation to function efficiently If the product will be placed in an alcove remember to leave at least 5 cm distance between the product and the ceiling and the walls Do not install the product in environments with temperatures below 5 C 3 3 Adjusting the stands If the product is not in balanced position adjust the front adjustable stands by rotating right or left 3 4 Power connection A A E WARNING Do not use extension or multi sockets in power connection WARNING Damaged power cable must be replaced by Authorized Service When placing two coolers in adjacent position leave at least 4 cm distance between the two units Our firm will not assume responsibility for any damages due to usage without earthing and power connection in compliance with national regulations The power cable plug must be easily accessible after installation Connect the refrigerator to an earthed socket with 220 240V 50 Hz voltage The plug must comprisea 10 16Afuse Do not use multi group plug with or without extension cable between the wall socket and the refrigerator 3 2 Attaching the plastic wedges Use the plastic wedges in the provided with the product to provide sufficient space for air circulation between the product and the wall 1 To attach the wedges remove the screws on the product and use the screws provided with the wedges 2 Attach 2 plastic wedges on the ventilation cover as shown in the figure Refrigerator User manual 30 EN

Скачать