Home
Главная
Kenwood
Электрочайник
KMIX SJM025 0WSJM02502
Инструкция по эксплуатации Страница: 3

Kenwood KMIX SJM025 0WSJM02502 [3/66] Care and cleaning

to use your kettle

1 Fill the kettle through either the

spout or lid. The water level must be

between ‘MAX’ and ‘MIN’.

●

Be economical: do not boil more

water than you need.

●

To improve the quality of your drinks

always use fresh water.

●

Empty the kettle after each use.

2 Check the lid is closed. Close the lid

by pushing down on the finger pad

area .

3 Plug in and switch on.

4Your kettle will boil and switch off

automatically. To re-boil, wait a few

seconds - the on/off switch needs

time to reset.

●

If you experience problems

with your kettle switching on

and off during use or

switching off before boiling,

check that the flat element is

free from scale - see

“descaling”.

●

Your kettle is fitted with a filter to

hold back limescale particles.

●

If you find drops of water under your

kettle, don’t worry - it is just

condensation.

boil-dry protection

●

If you switch on with too little water,

your kettle will cut out automatically.

Switch off, remove from the

powerbase and let it cool down

before re-filling. When it has cooled

down, the switch will reset itself.

care and cleaning

●

Before cleaning, unplug your kettle

and let it cool down.

the outside and powerbase

●

Wipe with a damp cloth, then dry.

Do not use abrasives - they will

scratch the metal and plastic

surfaces.

the inside

●

Even though your kettle comes with

a filter, you still need to clean the

inside (and the filter) regularly.

the filter

1 Open the lid.

2 Slide the filter out .

3 either rinse under the tap or use a

soft brush.

or when descaling your kettle, drop

the filter in too. Rinse thoroughly.

4 Slide the filter back in to refit .

descaling

●

Regular descaling of the flat element

will improve the performance of your

kettle. If the kettle is not descaled

regularly the build up of limescale

may result in the following:

●

problems may be experienced

with the kettle switching on and

off during use or switching off

before boiling.

●

the kettle may take longer to boil.

●

the flat element may be damaged.

Please note: Failure to descale your

kettle may invalidate your guarantee.

●

When limescale starts to build up on

the heating element, buy a suitable

descaler and descale your kettle.

After descaling, boil with fresh water

several times and discard. Clean any

descaler off the kettle - it can

damage the parts.

●

Some regions of the country have

chalky water. This makes boiled

water look cloudy and leaves a

deposit on the side of the kettle. This

is normal but can be removed with

regular cleaning.

●

Alternatively, to reduce limescale

build up, use filtered water to fill your

kettle.

Содержание

Похожие устройства

to use your kettle the inside Even though your kettle comes with a filter you still need to clean the inside and the filter regularly 1 Fill the kettle through either the spout or lid The water level must be between MAX and MIN Be economical do not boil more water than you need To improve the quality of your drinks always use fresh water Empty the kettle after each use 2 Check the lid is closed Close the lid by pushing down on the finger pad area 0 3 Plug in and switch on 4 Your kettle will boil and switch off automatically To re boil wait a few seconds the on off switch needs time to reset If you experience problems with your kettle switching on the filter 1 Open the lid 2 Slide the filter out 0 3 either rinse under the tap or use a soft brush or when descaling your kettle drop the filter in too Rinse thoroughly 4 Slide the filter back in to refit 0 descaling Regular descaling of the flat element will improve the performance of your kettle If the kettle is not descaled regularly the build up of limescale may result in the following problems may be experienced with the kettle switching on and off during use or switching off before boiling the kettle may take longer to boil the flat element may be damaged and off during use or switching off before boiling check that the flat element is free from scale see descaling Your kettle is fitted with a filter to hold back limescale particles If you find drops of water under your kettle don t worry it is just condensation Please note Failure to descale your kettle may invalidate your guarantee When limescale starts to build up on the heating element buy a suitable descaler and descale your kettle After descaling boil with fresh water several times and discard Clean any descaler off the kettle it can damage the parts Some regions of the country have chalky water This makes boiled water look cloudy and leaves a deposit on the side of the kettle This is normal but can be removed with regular cleaning Alternatively to reduce limescale build up use filtered water to fill your kettle boil dry protection If you switch on with too little water your kettle will cut out automatically Switch off remove from the powerbase and let it cool down before re filling When it has cooled down the switch will reset itself care and cleaning Before cleaning unplug your kettle and let it cool down the outside and powerbase Wipe with a damp cloth then dry Do not use abrasives they will scratch the metal and plastic surfaces 3

Скачать