Home
Главная
Candy
Вытяжка купольная
CGM 91W-07
Инструкция по эксплуатации Страница: 12

Candy CGM 91W-07 [12/18] Use and maintenance

- 12 -

various installations use screws and screw anchors suited to

the type of wall (e.g. reinforced concrete, plasterboard, etc.). If

the screws and screw anchors are provided with the product,

check that they are suitable for the type of wall on which the

hood is to be xed.

•Fixingthedecorativetelescopicue

Warning!Caution! If your appliance model features the lower

connector with a tab, before xing it in place bend the tab

inwards using a pair of pliers, as illustrated in gure5,step1.

Arrange the electrical power supply within the dimensions

of the decorative ue. If your appliance is to be installed in

the ducting version or in the version with external motor,

prepare the air exhaust opening. Adjust the width of the

support bracket of the upper ue (Fig.3). Then x it to the

ceiling using the screws A (Fig.3) in such a way that it is in line

with your hood and respecting the distance from the ceiling

indicated in Fig.2. Connect the ange C to the air exhaust hole

using a connection pipe (Fig.5 - Stage 2). Insert the upper ue

into the lower ue. Fix the lower ue to the hood using the

screws B provided (Fig.5 - Stage 2), extract the upper ue up

to the bracket and x it with the screws B (Fig.3). To transform

the hood from a ducting version into a ltering version, ask

your dealer for the charcoal lters and follow the installation

instructions.

•Filteringversion

Install the hood and the two flues as described in the

paragraph for installation of the hood in ducting version. To

assemble the ltering ue refer to the instructions contained

in the kit. If the kit is not provided, order it from your dealer

as accessory. The lters must be applied to the suction unit

positioned inside the hood. They must be centred by turning

them 90 degrees until the stop catch is tripped (Fig.8).

USE AND MAINTENANCE

4.1 We recommend that the cooker hood is switched on

before any food is cooked. We also recommend that the appli-

ance is left running for 15 minutes after the food is cooked, in

order to thoroughly eliminate all contaminated air.

The eective performance of the cooker hood depends on

constant maintenance; the anti-grease lter and the active

carbon lter both require special attention.

4.2Theanti-greasefilter is responsible retaining the

grease particles suspended in the air, therefore it is subject

to clogging with variable frequency according to the use of

the appliance.

4.3 To prevent the danger of possible res, at least every 2

months one must wash the anti-grease lters by hand using

non-abrasive neutral liquid detergents or in the dishwasher

at low temperatures and on short cycles.

4.4 After a few washes, colour alterations may occur. This does

not give the right to claim their replacement.

4.5Theactivecarbonlters are used to purify the air that

is sent back into the room and its function s to mitigate the

unpleasant odours produced by cooking.

4.6 The non-regenerable active carbon lters must be re-

placed at least every 4 months. The saturation of the active

charcoal depends on the more or less prolonged use of the

appliance, on the type of kitchen and on the frequency with

which anti-grease lter is cleaned.

4.7Beforeremountingtheanti-greasefiltersandthe

regenerableactivecharcoalltersitisimportantthat

theyarecompletelydry.

4.8Cleanthehoodfrequently,bothinternallyandexter-

nally,usingaclothdampenedwithdenaturedalcoholor

neutralliquiddetergentsthatarenonabrasive.

4.9 The lighting .system is designed for use during cooking

and not for the prolonged general lighting of the room. The

prolonged use of the lighting system signicantly decreases

the average duration of the bulbs.

4.10 If the appliance is equipped with courtesy lights it is pos-

sible to use them for general room lighting for a prolonged

amount of time.

4.11Attention: the non compliance with the hood cleaning

warnings and with the replacement and cleaning of the lters

entails risk of res. One therefore recommends keeping to the

suggested instructions.

4.13Replacinghalogenlightbulbs(Fig.6A):

To replace the halogen light bulbs B, remove the glass pane

C using a lever action on the relevant cracks.

Replace the bulbs with new ones of the same type.

Caution: do not touch the light bulb with bare hands.

4.15Replacingthehalogen/incandescentlamps(Fig.6B):

Only use lamps of the same type and wattage installed on

the device.

4.17Commands(Fig.9)mechanical the key symbols are

explained below:

A = LIGHT

B = OFF

C = SPEED I

D = SPEED II

E = SPEED III.

4.20Commandsluminous (Fig.10) the key symbols are

explained below:

A = LIGHT

B = OFF

C = SPEED I

D = SPEED II

E = SPEED III

F = AUTOMATIC STOP TIMER - 15 minutes (*)

If your appliance has the INTENSIVE speed function, from

speed THREE, press key E for 2 seconds and it will be activated

for 10 minutes after which it will return to the previously

set speed. When the function is active the LED flashes. To

interrupt it before the 10 minutes have elapsed, press key E

again. Some models allow activating this function even with

speed one and two.

By pressing key F for two seconds (with the hood switched

off ) the “cleanair” function is activated. This function switches

the appliance on for ten minutes every hour at the first speed.

As soon as this function is activated the motor starts up at the

first speed for ten minutes. During this time key F and key

C must flash at the same time. After ten minutes the motor

switches off and the LED of key F remains switched on with

a fixed light until the motor starts up again at the first speed

after fifty minutes and keys F and C start to flash again for ten

minutes and so on. By pressing any key for the exclusion of

the hood light the hood will return immediately to its normal

functioning (e.g. if key D is pressed the “cleanair” function is

deactivated and the motor moves to the 2nd speed straight

away. By pressing key B the function is deactivated).

(*) The “AUTOMATICSTOPTIMER” delays stopping of the

hood, which will continue functioning for 15 minutes at the

operating speed set at the time this function is activated.

Candy CGM 91W-07 [12/18] Use and maintenance

Содержание

Похожие устройства