Miele Classic C1 SBAD0 41BAD001RUT [68/76] Electrical connection au nz
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Miele Classic C1 SBAD0 41BAD001RUT [68/76] Electrical connection au nz

Miele Classic C1 SBAD0 41BAD001RUT [68/76] Electrical connection au nz
en
68
After sales service
In the event of a fault that you cannot
easily remedy, please contact your
Miele Dealer or Miele (see end of book-
let for contact details).
Please note that telephone calls may
be monitored or recorded for training
purposes (UK only).
Guarantee
In the U.K. the appliance is guaranteed
for 2 years from the date of purchase.
However, you must activate your cover
by calling 0330 160 6640 or registering
online at www.miele.co.uk.
For information on the appliance guar-
antee specific to your country please
contact Miele. See end of booklet for
contact details.
Electrical connection for
the UK
All electrical work should be carried out
by a suitably qualified and competent
person in strict accordance with current
national and local safety regulations (BS
7671 in the UK). The voltage and fre-
quency are given on the data plate loc-
ated underneath the vacuum cleaner.
Please ensure that these match the
household mains supply. The fuse rat-
ing is quoted on the plug. The appli-
ance is supplied with a cable and moul-
ded plug ready for connection to a
230-240 V/50 Hz a.c. single phase sup-
ply.
Non-rewireable plugs BS 1363
The fuse cover must be re-fitted when
changing the fuse, and if the fuse cover
is lost the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is em-
bossed in words on the base of the
plug, (as applicable to the design of
plug fitted). Replacement fuses should
be ASTA approved to BS1362 and have
the correct rating. Replacement fuses
and fuse covers may be purchased
from your local electrical supplier.
Electrical connection AU,
NZ
All work should be carried out by a suit-
ably qualified and competent person in
strict accordance with national and
local safety regulations. The voltage
and rated load are given on the data
plate located underneath the vacuum
cleaner. Please ensure that these match
the household mains supply. The appli-
ance is supplied with a cable and moul-
ded plug ready for connection to a
230V/50Hz AC single phase supply.
Test Marks
Electrical safety
RCM Mark
Electrically sup-
pressed
according to
AS/NZS CISPR
14.1

Содержание

Похожие устройства

en After sales service In the event of a fault that you cannot easily remedy please contact your Miele Dealer or Miele see end of book let for contact details Please note that telephone calls may be monitored or recorded for training purposes UK only Guarantee In the U K the appliance is guaranteed for 2 years from the date of purchase However you must activate your cover by calling 0330 160 6640 or registering online at www miele co uk For information on the appliance guar antee specific to your country please contact Miele See end of booklet for contact details Electrical connection for the UK All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current national and local safety regulations BS 7671 in the UK The voltage and fre quency are given on the data plate loc ated underneath the vacuum cleaner Please ensure that these match the household mains supply The fuse rat ing is quoted on the plug The appli ance is supplied with a cable and moul ded plug ready for connection to a 230 240 V 50 Hz a c single phase sup ply Non rewireable plugs BS 1363 68 The fuse cover must be re fitted when changing the fuse and if the fuse cover is lost the plug must not be used until a suitable replacement is obtained The colour of the correct replacement cover is that of the coloured insert in the base of the plug or the colour that is em bossed in words on the base of the plug as applicable to the design of plug fitted Replacement fuses should be ASTA approved to BS1362 and have the correct rating Replacement fuses and fuse covers may be purchased from your local electrical supplier Electrical connection AU NZ All work should be carried out by a suit ably qualified and competent person in strict accordance with national and local safety regulations The voltage and rated load are given on the data plate located underneath the vacuum cleaner Please ensure that these match the household mains supply The appli ance is supplied with a cable and moul ded plug ready for connection to a 230V 50Hz AC single phase supply Test Marks Electrical safety RCM Mark Electrically sup pressed AS NZS CISPR according to 14 1

Скачать