Timberk TAP FL70 SF (BL) Черный [5/20] Transportation and storage
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Timberk TAP FL70 SF (BL) Черный [5/20] Transportation and storage

Timberk TAP FL70 SF (BL) Черный [5/20] Transportation and storage
www.timberk.com • electric air purifier
5
Before cleaning the device, make sure that it is unplugged. Otherwise, it may
lead to electrical shock.
Use damp and soft cloth to wipe the external surface of the device.
To avoid electrical shock, be careful not to scratch and damage the elements
during cleaning.
It is prohibited to use solvents, petroleum, xylene, hard brush, talcum powder
and other substances; only water is allowed.
The device shall be cleaned once or twice in a week.
Remove dust at the top of the e2f filter using a vacuum cleaner.
Store the device in premises with low humidity.
IMPORTANT!
Make sure to start cleaning and filter management
after turning off power, unplugging from power outlet
and making sure that the fan has stopped. There is
danger for electric shock or other accidents if filter is
changed during operation.
7. DEVICE CLEANING AND MAINTENANCE
In case of emergency contact information listed in the table 2 below. If you
can not solve problems independently, to a service center.
8. TROUBLESHOOTING
Table 2
Breakdown Reason Solution
Can Not Run
1. No power
2. Did not press the On/Off bottom on
control panel
3. Parts of the electricity broken
1. Plug the power and connect well
2. Press On/Off bottom on control
panel
3. Send to repair
Gentle air stream Cannot be off
1. Did not press the off bottom
2. Parts of the electricity broken
1.Press On/Off bottom on control panel
2. Send to repair
Abnormal Sound
1. Something inside
2. Wind wheel loose
3. Electrical machine damage
1. Remove the filter, and try again. If
cannot settle, send to repair.
2. Send to repair
3. Send to repair
Purify function not obvious 1.Need to change filter 1. Change filter
Term reliability is 5 years.
At the end of the life of the puripier should be subjected to disposal in
accordance the rules, regulations and methods, at the place of disposal.
9. UTILIZATION
10. TRANSPORTATION AND STORAGE
1. When transporting, any possible impacts and movements of the
package inside a vehicle must be avoided.
2. Handling symbols on the unit’s package must be strictly observed when
transporting and storing it.
3.
Temperature
requirements*
Humidity
requirements*
Transportation and
storage
-30°C to +50°C
15% to 85%
(no condensate)
We are researching new technologies and constantly improving the quality
of our products. Specifications, design and scope of delivery may be
changed without any prior notice.
* Products must be stored in dry, ventilated storages at the temperature
not lower than -30°C.

Содержание

Похожие устройства

Скачать