Vitek VT-8133 B ГОЛУБОЙ, СЕРЫЙ [6/32] English

Vitek VT-8133 B ГОЛУБОЙ, СЕРЫЙ [6/32] English
6
ENGLISH
a person who is responsible for their safety or
if they are not instructed by this person on the
usage of the unit.
Do not leave children unattended to prevent
using the unit as a toy.
For children safety reasons do not leave poly-
ethylene bags, used as packaging, unattended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
Regularly check the power plug and power
cord integrity for damages.
Never use the unit if the power cord or the
power plug is damaged, if the unit works
improperly, after it was dropped or in case of
leakage.
Do not attempt to repair the unit. Do not disas-
semble the unit by yourself, if any malfunction is
detected or after it was dropped, unplug the unit
and apply to any authorized service center from
the contact address list given in the warranty
certificate and on the website www.vitek.ru.
For environmental protection do not discard
the unit with usual household waste after its
service life expiration; apply to a specialized
center for further recycling.
To avoid damages, transport the unit in the
original package only.
Watch over the rechargeable battery. Remove
the rechargeable battery from the vacuum
cleaner if you are not going to use the unit for
a long time.
Keep the unit in a dry cool place out of reach
of children and disabled persons.
THIS UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
SAFETY MEASURES
If the suction power of the vacuum cleaner
decreases rapidly while cleaning, switch it off
immediately and check the extension pipe (13)
for obstruction. Remove the obstruction and
only then continue cleaning.
Do not use the vacuum cleaner near very hot
surfaces, ashtrays or in places where inflam-
mable liquids are stored.
ASSEMBLING THE VACUUM CLEANER
After unit transportation or storage under
cold (winter) conditions, it is necessary to
keep it for at least 3 hours at room tempera-
ture before switching on.
Install the rechargeable battery (1) in the
installation place. To do this, make sure that
the lock (2) is turned vertically, match the
ledges on the battery (1) with the grooves in
the installation place and insert the battery (1)
as far as it will go. Make sure that the battery
is fixed properly (pic. 1).
To remove the rechargeable battery (1), turn
the lock (2) to 90°, using a coin, for instance,
and remove the battery (1).
Battery charging
Before using the unit for the first time or after a
long period of inactivity, the battery (1) needs to
be charged for 4 hours.
A fully charged battery (1) provides approxi-
mately 20 minutes of continuous vacuum
cleaner operation at maximal power and about
35-40 minutes of operation at low power level.
Assemble the floor-standing support (20):
insert the vertical stand (19) into the sup-
port (20) until the lock goes off (pic. 2).
Insert the plug of the power adapter
cord (22) into the connection socket (21),
insert the power adapter (23) into the mains
socket (pic. 3).
Set the vacuum cleaner to charge (pic. 4), the
operation/charging indicator (7) will light up.
When the battery (1) charging cycle is fin-
ished, all segments of the indicator (7) will be
glowing green.
Notes:
You can adjust the power adapter (23) cord
length by winding it around the lower part of
the floor-standing support (20) (pic. 5).
Charge the battery (1) at the temperature
from +5°C to +35°C.
If you haven’t used the unit for a month or lon-
ger, charge the battery (1) completely before
using the vacuum cleaner.
Attaching the extension pipe
and attachments
Insert the extension pipe (13) into the air inlet
of the vacuum cleaner until the lock (11) clicks
(pic. 6).
Choose the necessary attachment elec-
tric brush (16), combined attachment (32)
or crevice nozzle (33) and attach it to the
extension pipe (13) (pic. 6).
Note:
If necessary, you can attach the electric
brush (16), the combined attachment (32)
IM VT-8133.indd 6 10.02.2017 16:05:42

Похожие устройства

Скачать