Anex Sport Arch Q [29/112] Pre use procedures
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Anex Sport Arch Q [29/112] Pre use procedures

Anex Sport Arch Q [29/112] Pre use procedures
STROLLER
ASSEMBLING / DISASSEMBLING.
Unbox this stroller’s frame and put it horizontally on the
floor (fig. 1). Disable the lock against accidental unfolding
(fig. 2). Pull upwards vigorously till the system is secured,
while holding the handle (you should hear a specific sound)
(fig. 3, 4). To fold the frame, press the red button located on
the frame’s right lever. Then simultaneously pull the levers
located on both sides of the frame (fig. 5). Gently push the
frame down to the original position it had when you were
unpacking this stroller (fig. 1). This stroller features a handle
for carrying or transporting this stroller’s frame (fig. 6).
For easy carrying or transporting the frame turn the handle
through 90° (fig. 7).
HANDLE HEIGHT ADJUSTMENT
Simultaneously press the round buttons, placed in parallel on
both sides of the handle. Set a comfortable handle height for
you (fig. 7).
WHEEL MOUNTING / DISMOUNTING
Before mounting a wheel, insert an axis pin, while holding
the red button (fig. 8). Release the button to secure this axis
pin (you should hear a specific sound); To mount a wheel,
press the wheel’s center button, then push it along the axis
pin till it stops, release the button and push gently until it
locks (fig. 9). To dismantle a wheel, press down its midpoint
and pull along the axis pin till it comes off completely. (fig. 9).
A wheel is dismounted without the axis pin, but the axis pin
can be removed as well by pressing the red button (fig. 8).
FRONT SWIVEL WHEELS
DISMOUNTING AND LOCKING
This stroller’s frame features two front swivel wheels capable
of rotating on their axis through 360°. To dismount a front
wheel, vertically press the button located above this wheel.
A wheel is dismounted together with its axis pin (fig. 10). To
secure the rotary wheels system, turn the regulator located
below the button used for their dismounting (fig. 11).
BRAKE
This stroller features a parking brake blocking its rear wheels
(fig. 12). To stop this stroller, you must press the pedal
blocking rear wheels (fig. 12). To continue moving along, you
need to reset the pedal (fig. 12).
SHOCK ABSORPTION
The stroller has a steel-ring shock absorption system and
frame shock absorption that let your child feel comfortable.
(fig. 13, 14). To adjust the frame-based shock absorption
mechanism, turn both regulators (right and left) in the same
direction (fig. 14). The spring shock absorption mechanism
is regulated using a special switch located under the shock
absorber (fig. 13). Always adjust both sides equally.
PORTABLE CRADLE
MOUNTING / DISMOUNTING
To mount the portable cradle, place the adapters into the
adapter pockets, located on the frame’s inner side (fig. 15).
The portable cradle adapters are blocked automatically;
To dismount the portable cradle, press the buttons of
the portable cradle adapters, while lifting it up (fig. 15). If
necessary, the portable cradle’s inner part can be removed
and washed (fig. 16, 17). The portable cradle’s backrest
(covered by a coconut mattress) can be adjusted till the
desired height is reached using a regulator located on the
portable cradle’s bottom side (fig. 18).
PORTABLE CRADLE HOOD,
FEET COVER
The portable cradle features a convenient foldable hood
protecting a child from the elements (wind, sun, snow, rain).
The stroller’s hood position is adjusted with two buttons at
its bottom (fig. 19). In order to fix the canopy, pull it towards
yourself (You will hear distinctive sound). The portable cradle
features an additional handle for easy carrying (fig. 20). The
portable cradle features a feet cover, which is put on in its
forepart and secured with a zipper and buttons on both sides
(fig. 21).The portable cradle’s hood can be ventilated by
unfastening a zipper on the roof and untucking the bottom
part (fig. 22). This stroller features an insect protection
(fig. 23). This stroller features a rain protection system
matching both the portable cradle and the seat unit
(fig. 32, 33).
PRE-USE PROCEDURES
EN

Содержание

Похожие устройства

Скачать