HansGrohe Metris Classic 31314000 [4/40] Assembly see page 31
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

HansGrohe Metris Classic 31314000 [4/40] Assembly see page 31

HansGrohe Metris Classic 31314000 [4/40] Assembly see page 31
4
Assembly see page 31
Safety Notes
Gloves should be worn during installation to
prevent crushing and cutting injuries.
The product may only be used for bathing,
hygienic and body cleaning purposes.
Do not allow the streams of the shower touch
sensitive body parts (such as your eyes). An
adequate distance must be kept between the
shower and you.
The product may not be used as a holding han-
dle. A separate handle must be installed.
The hot and cold supplies must be of equal
pressures.
Installation Instructions
• Prior to installation, inspect the product for
transport damages. After it has been installed, no
transport or surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
Technical Data
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 - 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 80°C
Recommended hot water temp.: 65°C
Thermal disinfection: max. 70°C / 4 min
Safety against backflow
The product is exclusively designed for drinking
water!
English
Cleaning (see page 37) and
enclosed brochure
Flow diagram (see page 34)
Hand shower
Bath Spout
Dimensions (see page 34)
Spare parts (see page 38)
Symbol description
Do not use silicone containing acetic
acid!
Operation (see page 35)
Maintenance check valve
(see page 36)
The check valves must be checked
regularly according to DIN EN 1717 in
accordance with national or regional
regulations (at least once a year).
Test certificate (see page 40)

Содержание

Похожие устройства

Скачать