Nec MultiSync E805 SST (ShadowSense) [2/10] For using touch panel

2 © NEC Corporation 2016

For using Touch Panel

Turn off the monitor.

2. Install the equipment.

- Using slot 2 type PC (OPS):

Connect the slot 2 type PC into the option board slot. Connect the B type connector

to the USB upstream port on the left back side of the monitor and the A type

connector to the downstream port on the slot 2 type PC.

NOTE: Please refer to the slot 2 type PC’s manual for connection.

NOTE: When you set option board accessory other than slot 2 type

PC, touch function may not work.

- Using external computer:

Connect the B type connector to the USB upstream port on the left back side of the

monitor and the A type connector to the downstream port on the external computer

(Figure 1).

NOTE: On all ShadowSense touch displays from 40” up to 80”, the USB connector

type B is located on the left back side of the monitor, above the OPS slot. (Figure 2)

NOTE: On all ShadowSense touch displays from 84” up to 98”, the USB connector is

located on the bottom of the right back side of the monitor. (Figure 3)

Figure 1: Figure 2: