Saturn ST-OH1671 [4/13] To operate

1. Castor Wheels

2. Power Switch

3. Thermostat Knob

4. Indicator Light

5. Carry Handle

6. Front Cover

7. Radiator Fins

8. Cord Storage

Safety Control (Thermal Cut-Out)

This model has two levels of over heat protection

1. Automatic thermal cut-off

Switches off the heater in the event of overheating or malfunction and resets once

the temperature drops to a normal level.

2. Thermal fuse

In the event that the automatic thermal cut-off fails to operate the heater has a

further safety device. This is a switch, which performs a protective function. It

protects an electric circuit, its elements and the heater itself from overheating and

ignition at running of high current.

If overheating or malfunctions continue, return the heater to an Approved Service

Agent for examination.

To Assemble:

1. Unpack the Castor Wheels and Arc-shaped Brackets from the heater packaging.

2. Turn the radiator upside-down on a scratch-free and stable surface to prevent

damage to the paint finish or your floor surfacing.

3. Fit the two (2) Castor Wheels onto the radiator by placing the Arc-shaped Brackets

between the outermost fins on each side of the radiator.

4. Securely fasten the two (2) Castor Wheels onto the radiator by screwing two (2)

Wing Nuts onto each Foot.

5. Turn the radiator in upright position after the Castor Wheel Assembly fitted. For

the correct upright position, please refer to fig. below.

CAUTION: Only operate the radiator in

normal upright position with Castor

Wheel Assemblies attached to the bottom

of the unit (wheels on the bottom, controls

on the top), any other position could

create a hazardous situation.

To Operate:

1. Place the heater in an upright position on a flat, steady, heat-resistant surface.

Make sure there is nothing flammable or heat sensitive within 1 meter (40 inches).

Operating the heater in any other position could cause a hazard.

2. Insert the plug into a suitable wall outlet after turning the thermostat knob counter-

clockwise to the minimum position and setting the power switches to “O” OFF.

The heater is suitable for operation on an A.C. power supply having the same

voltage as that show on it’s rating label.