Synology RX4 / RX410 [13/24] Connect with synology rackstation

Synology RX4 / RX410 [13/24] Connect with synology rackstation
Chapter 2: Set Up RX410
13
5
Repeat the steps above to assemble all hard disks you have prepared. Fix
the two rack mount kits on both sides with their screws provided.
Note:
If you want to set up a RAID set, it is recommended that all installed hard
disks are of the same size to make the best use of hard disk capacity.
Connect with Synology RackStation
1
Connect one end of the power cord to the power port of RX410, and the
other to the power outlet.
2
Connect RX410 with Synology RackStation:
• Connect with RS810+/RS810RP+:
Take the eSATA cable shown below to connect to the eSATA ports of
RX410 and Synology RackStation.
RX410
RS810+/RS810RP+
eSATA connector
After the connection is complete, RX410 will be turned on or off automatically
when the connected RackStation powers on or off.

Похожие устройства

Скачать