Home
Главная
Portotecnica
Аппарат Высокого Давления
HPS 1012 M
Инструкция по эксплуатации Страница: 17

Portotecnica HPS 1012 M [17/88] English

English

- 17 -

CLASSIFICATION

The user must observe the conditions of use of the applian-

ce prescribed by the Rules, and particularly he must respect

the following classication:

As for the protection against electric shock, the H.P.cleaner

belongs to CLASS I.

The H.P. cleaner is factory set and all its safety devices are

sealed. It is forbidden to alter their adjustment values.

In the Hot water cleaner the water is heated by a burner feed

with Diesel fuel.

The H.P. cleaner must be always used on a rm and at

ground, furthermore it must not be moved while it is working or

connected to the electric supply.

Failure to observe this prescription may cause danger for the

user.

The H.P. cleaner must not be used in the presence of corrosive

or potentially explosive atmospheres. (vapours or gas)

The electric connection must be performed by qualied tech-

nicians who are able to work in observance of the governing

rules (as far as Italy is concerned please refer to the law 46/90)

and of the manufacturer’s instructions.

A wrong electric connection may cause damage to persons,

animals or things, and the manufacturer cannot be considered

responsible for these.

The H.P. cleaners with power lower than 3 kW are equipped

with a plug for connection to the electric supply.

In this case please check if the electric power system and the

electric sockets are compatible with the max. power of the

appliance indicated on the plate. (kW)

In case of doubt, please apply to qualied personnel.

If the socket and the plug of the machine are not compatible,

have the plug replaced with a suitable type by qualied per-

sonnel.

Before connecting the machine make sure that the data indica-

ted on the plate correspond to those of the electric supply.

Do not use extensions to feed the H.P. cleaner.

The electric safety of this machine may be assured only when

it is properly connected to an efcient grounding system in

accordance with the governing laws for electric safety. (As far

as Italy is concerned, please refer to the law 46/90)

It is necessary to check this essential safety requisite. In case

of doubt, ask for accurate control of the power system by

qualied personnel.

The manufacturer may not be considered responsible for dama-

ges occurred because of the lack of the grounding system.

The H.P. cleaner must be connected to the electric supply by

means of an omnipolar switch with opening contacts of at least

3 mm. This switch must have electric features which are consi-

stent with the appliance. (This requisite does not apply to H.P.

cleaners with plug and electric power lower than 3 kW)

The appliance is disconnected from the electric supply only by

pulling out the plug or switching off the omnipolar switch.

Failure to respect the above absolves the manufacturer of all

liability and represents negligent use of the product.

The water cleaner is considered as a xed device.

Water cleaners with the “Total Stop” device should be con

sidered as off when the omnipolar switch is in the “O” position

or the plug is unplugged from the socket.

The most important instructions

are marked with the symbol:

INTRODUCTION

This manual must be read before installing, setting up and

using the cleaner. The manual is an integral part of the product.

It is composed of two parts, one of which is yellow.

Read the warnings and instructions in this manual carefully as

they provide important indications as to SAFETY IN USE and

MAINTENANCE, paying special attention to the general rules

for safety listed in the yellow booklet.

KEEP THIS MANUAL CAREFULLY FOR FUTURE CON-

SULTATION.

The contents of this booklet must be brought to the attention

of persons using or carrying out routine maintenance on this

water cleaner.

Portotecnica HPS 1012 M [17/88] English

Содержание

Похожие устройства