FSP VESTA 850 [3/6] Жк панель

FSP VESTA 850 [3/6] Жк панель
6. Trouble Shooting
Use the table below to solve minor problems.
Problem
Possible Cause
Solutions
No LED display on the
front panel.
Low battery.
Charge the UPS at least 6 hours.
Battery fault.
Replace the battery with the same
type of battery.
The UPS is not turned on.
Press the power switch again to turn
on the UPS.
Alarm continuously
sounds when the
mains is normal.
The UPS is overload.
Remove some loads first. Before
reconnecting equipment, please
verify that the load matches the UPS
capability specified in the specs.
When power fails,
back-up time is
shorten.
The UPS is overload.
Remove some critical load.
Battery voltage is too low.
Charge the UPS at least 6 hours.
Battery defect. It might be
due to high temperature
operation environment, or
improper operation to battery.
Replace the battery with the same
type of battery.
The mains is normal
but LED is flashing.
Power cord is loose.
Reconnect the power cord properly.
7 Specifications
Model
Vesta 450
Vesta 650
Vesta 850
CAPACITY
450 VA / 240 W
650 VA / 360 W
850 VA /480 W
Voltage
110/120 VAC or 220/230/240 VAC
Voltage Range
81-145 VAC / 162-290 VAC
Voltage Regulation
+/-10%
Transfer Time
Typical 2-6 ms, 10 ms max.
Waveform
Simulated Sine Wave
Type & Number
12 V/4.5 AH x 1
12 V/7 AH x 1
12 V/9 AH x 1
Charging Time
4-6 hours recover to 90% capacity
Dimension (DxWxH)
300 x 111 x 141 mm
Net Weight (kgs)
3.55
4.33
4.97
Humidity
0-90 % RH @ 0-40° C (non-condensing)
Noise Level
Less than 40 dB
USB/RS-232 (Option)
Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7,
Linux, Unix and MAC
1. Содержание упаковки
Вы получите следующие компоненты в упаковке
- Блок бесперебойного питании (сокращенно ИБП)
- Инструкцию
- Интерфейсный кабель (только для модели с USB/RS-232 портом)
- Кабель питания только для IEC-type моделей)
2. Общее представление продуктов
Передняя панель:
Back View:
IEC Type Schuko Type
Line Interactive UPS Quick Guide V.1.0
Вид зади
Выходные разъемы
AC вход
По усмотрению
Предохранитель
USB порт
Модем / телефон и сети
Защита всплесков
напряжения
RS-232 порт
RU
4
5
ЖК панель
ЖК панель:
Входное напряжение Индикатор нагрузки
Выходное напряжение
(мигает при перегрузке)
Индикатор работы от сети Индикатор заряда батареи
Индикатор работы от батареи (мигает когда батарея разряжена)
Кнопка включения/выключения

Содержание