Beko OIE 25502 X [13/64] Installation and connection

Содержание

Installation and connection Product can only be installed and connected in accordance with the statutory installation rules Electrical connection Connect the product to a grounded outlet line protected by a fuse of suitable capacity as stated in the Technical specifications table Have the grounding installation made by a qualified electrician while using the product with or without a transformer Our company shall not be liable for any damages that will arise due to using the product without a grounding installation in accordance with the local regulations Connecting the power cable 1 If it is not possible to disconnect all poles in the supply power a disconnection unit with at least 3 mm contact clearance fuses line safety switches contactors must be connected and all the poles of this disconnection unit must be adjacent to not above the product in accordance with IEE directives Failure to obey this instruction may cause operational problems and invalidate the product warranty Additional protection by a residual current circuit breaker is recommended DANGER The product must be connected to the mains supply only by an authorised and qualified person The product s warranty period starts only after correct installation B Manufacturer shall not be held responsible for damages arising from procedures carried out by unauthorised persons DANGER The power cable must not be clamped bent or trapped or come into contact with hot parts of the product B A damaged power cable must be replaced by a qualified electrician Otherwise there is risk of electric shock short circuit or fire Connection must comply with national regulations The mains supply data must correspond to the data specified on the type label of the product Open the front door to see the type label Power cable of your product must comply with the values in Technical specifications table __________________________ 2 For single phase connection connect the wires as identified below Brown Black cable L Phase Blue Grey cable N Neutral Green yellow cable E Ground Installing the product 1 Slide the oven into the cabinet align and secure it while making sure that the power cable is not broken and or trapped A DANGER Before starting any work on the electrical installation disconnect the product from the mains supply There is the risk of electric shock Secure the oven with 2 screws as illustrated 13 EN