Gazer MMR5103 Инструкция по эксплуатации онлайн [12/40] 322230

ENG

Usage

pressing MENU. Press UP/DOWN to navigate to «Auto-recording»

and select the required value, then press MENU to exit from the

settings and resume the recording by pressing SEL/REC.

6. G-sensor. The mirror features a built-in G-sensor (a three-axis

accelerometer) that traces any sharp changes in the vehicle’s driving

pattern (hard braking, acceleration, and impact). Files recorded when

the G-sensor is tripped are automatically protected from deletion

through loop overwriting and stored in a separate “EVENT” folder

(can contain a maximum of 15 les) where loop overwriting also

takes place. This recording principle ensures the device’s continuous

operation with no additional maintenance required – the space on the

SD card is freed up automatically.

To adapt the G-sensor to external operating conditions, the mirror

allows adjusting the sensor’s sensitivity. To congure the G-sensor

sensitivity, rst stop the recording by pressing SEL/REC, then press

MENU to access the settings menu. Press UP/DOWN to navigate

to «G-sensor sensitivity» and select the required value, then press

MENU to exit from the settings menu and resume the recording by

pressing SEL/REC.

7. Motion sensor. Thanks to the motion sensor, the built-in DVR

supports automatic activation of the recording mode upon detection

of motion in the frame as well as automatic deactivation of this mode

after the motion in the frame stops. To enable and congure this

function, rst stop the recording by pressing SEL/REC and then press

MENU to access the settings menu. Press UP/DOWN to navigate to

the «Motion sensor» and enable/disable the function or go to «Motion

sensor sensitivity» to set the sensitivity level.

8. Parking mode. When the parking mode is activated, the built-

in DVR will continue recording up to 12 hours after ACC signal is

terminated. In this case, the screen and the status indicators will be

turned off. To enable this function, rst stop the recording by pressing

SEL/REC and then press MENU to access the settings menu. Press

UP/DOWN to navigate to «Parking mode» and select for how long the

DVR will operate after the ignition is turned off.