Stanley STPT600-B9 [4/24] Additional safety instructions for blowers
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Stanley STPT600-B9 [4/24] Additional safety instructions for blowers

Stanley STPT600-B9 [4/24] Additional safety instructions for blowers
ENGLISH
4
(Original instructions)
b. Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c. Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on
invites accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
e. Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
toolin unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices
can reduce dust related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions and
the work to be performed. Use of the power tool for
operations different from those intended could result in a
hazardous situation.
5. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is
maintained.
Additional Safety Instructions for Blowers
• Do not collect still smoldering cigarette ashes, freshly cut
metals shaving, screws, nails and the like.
• Never block suction inlet and outlet.
• Do not cross gravel paths or roads whilst your product is
switched on during blow/vac mode. Walk, never run.
• Always be sure of your footing, particularly on slopes.
• Do not overreach and keep your balance at all times.
• Do not place the inlet or outlet of the vacuum near eyes
or ears when operating. Never blow debris in the
direction of bystanders.
• Keep all cooling air inlets clear of debris.
• To protect your feet and legs while operating the
appliance, always wear heavy duty footwear and long
trousers.
• Never allow children to use the appliance.
• Wear protective goggles while operating.
• If operating an appliance in a damp location is
unavoidable, use a Residual Current Device (RCD) with
a tripping current of not more than 30mA protected
supply. Use of an RCD reduces the risk of electric shock.
• To prevent dust irritation the wearing of a face mask is
recommened.

Содержание

Похожие устройства

Скачать