Philips HQ 6906 [9/102] English

4 Remove the shaving heads (cutters and guards) one by one and clean

them with the cleaning brush supplied.

Note: Do not clean more than one cutter and guard at a time, since they are

all matching sets. If you accidentally mix up the cutters and guards, it may take

several weeks before optimal shaving performance is restored.

5 Clean the cutter with the short-bristled side of the cleaning brush.

Brush carefully in the direction of the arrow.

6 Brush the guard.

7 Put the shaving heads back into the shaving unit. Put the retaining

frame back into the shaving unit, push it down (1) and turn the wheel

clockwise (2).

8 Put the shaving unit back onto the shaver.

Extra-thorough cleaning

For extra-thorough cleaning, put the shaving heads in a degreasing liquid

(e.g. alcohol) every six months. To remove the shaving heads, follow steps

1 to 4 described above. After cleaning, lubricate the central point on the

inside of the guards with a drop of sewing machine oil to prevent wear of

the shaving heads.

trimmer (HQ6946/HQ6940 only)

Clean the trimmer every time you have used it.

1 Switch off the shaver. Remove the mains plug from the wall socket

and pull the appliance plug out of the shaver.

ENGLISH 9