Scarlett SL-1503 [4/5] Gb gb instruction manual

Scarlett SL-1503 [4/5] Gb gb instruction manual
www.scarlett-europe.com SL-1503
4
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
Please read these operating instructions carefully
before connecting your kettle to the power supply,
in order to avoid damage due to incorrect use.
Before the first switching on check that the voltage
indicated on the rating label corresponds to the
mains voltage in your home.
Incorrect operation and improper handling can lead
to malfunction of the appliance and injuries to the
user.
For home use only. Do not use for industrial
purposes.
Always unplug the appliance from the power supply
when not in use.
Keep the base unit away from water and protect
from splashes.
Do not immerse the unit, cord or plug in water or
other liquids. If it has happened, unplug the
appliance immediately. An expert should check the
unit before using it again.
Do not operate the appliance if the cord or the plug
is damaged or if the appliance has been otherwise
damaged. In such cases take the appliance to a
qualified specialist for check and repair if
necessary.
Ensure that the cord does not hang over sharp
edges and keep it away from hot surfaces.
To disconnect the appliance from the power supply
pull it out by the plug only, not by the cord.
Place the appliance on a dry stable surface, away
from sources of heat (e.g. hotplates); do not place
under curtains and shelves.
You should never leave the appliance not
supervised when in use.
Keep the appliance away from children.
Use the kettle only with the base unit supplied, do
not use the base unit for any other purposes.
Never take the kettle from its base while in
operation. Switch the appliance off first.
Close the lid properly before switching on.
Otherwise, the appliance will not switch off
automatically and hot water may overflow.
The kettle is for heating water only, not for any
other purposes and liquids.
BEFORE USING FOR THE FIRST TIME
Remove all packing materials and sticker from the
kettle.
Fill the kettle with cool water up to the maximum
level mark and boil it. Empty the kettle. Repeat this
operation. The appliance is ready for use.
INSTRUCTION FOR USE
FILTER PLACING
Open the lid by pressing the lid release button.
Place the filter between two grooves near the spout
at the front of the kettle.
Ensure that the filter is pressed properly down to
the bottom of the grooves, and then close the lid.
FILLING
Remove the kettle from the base unit.
You can fill the kettle with water via the spout or
neck with open lid.
Do not fill the kettle with less than 0.5 l of water
(less than “MIN” mark) to prevent it from operating
dry and more than 1.5 l (up to “MAX” mark) to
avoid overfilling and water spilling out during
boiling.
SWITCHING ON
After filling with water, place the kettle on the base
unit.
Connect the plug to the power supply and push
On/Off switch. The appliance will turn on and the
indicator will light.
SWITCHING OFF
When water begins to boil, the kettle will switch off
automatically and indicator light will go off.
NOTE: This appliance has a safety system, which
automatically switches the heating element off if
the appliance inadvertently had been switched on
when empty, or if it operates dry. In this case let
the appliance cool down for 10 minutes before
filling it with water again.
CARE AND CLEANING
Open the lid and pour out the water.
Clean the outside of the kettle and the base unit
with soft damp cloth, then wipe with dry cloth. Do
not use any abrasive materials.
Remove scale regularly, using special descaling
agents, available at the market, following
instructions on cleaner’s package.
FILTER CLEANING
Remove the filter out of the kettle.
Place it under a jet of water and rub gently any
remaining elements with a soft brush (not
included).
Return the filter to its place.
STORAGE
Switch off the appliance and unplug it; let it entirely
cool.
Carry out requirements of Chapter CLEANING
AND CARE.
The cord could be winded into a cord storage
compartment provided in the base unit.
Keep the appliance in a dry cool place.
RUS РУКОВОДСТВО ПО
ЭКСПЛУАТАЦИИ
МЕРЫ БЕЗОПАСНОСТИ
Внимательно прочитайте данную инструкцию
перед эксплуатацией прибора во избежание
поломок при использовании.
Перед первоначальным включением проверьте,
соответствуют ли технические характеристики
изделия, указанные на наклейке, параметрам
электросети.
Неправильное обращение может привести к
поломке изделия, нанести материальный ущерб
и причинить вред здоровью пользователя.
Использовать только в бытовых целях. Прибор
не предназначен для промышленного
применения.
Если устройство не используется, всегда
отключайте его от электросети.
Не допускайте попадания воды на базу питания.
Скачать