Tp-Link TL-WR845N V1 Инструкция по эксплуатации онлайн [26/119] 339821

TL-WR845N

300Mbps Wireless N Router

 Wireless Radio - Enable or disable the wireless radio.

 Wireless Network Name - Enter a string of up to 32 characters. The same name of

SSID (Service Set Identification) must be assigned to all wireless devices in your

network. Considering your wireless network security, the default SSID is set to be

TP-LINK_XXXX (XXXX indicates the last unique four numbers of each router’s MAC

address). This value is case-sensitive. For example, TEST is NOT the same as test.

 Region - Select your region from the pull-down list. This field specifies the region where

the wireless function of the router can be used. If your country or region is not listed,

please contact your local government agency for assistance.

 Disable Security - The wireless security function can be enabled or disabled. If disabled,

the wireless stations will be able to connect the router without encryption. It is

recommended strongly that you choose one of following options to enable security.

 WPA-PSK/ WPA2-PSK

- Select WPA based on pre-shared passphrase.

 Wireless Password - You can enter ASCII or Hexadecimal characters.

For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z, the

length should be between 8 and 63 characters.

For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F,

the length should be between 8 and 64 characters.

Please also note the key is case sensitive, this means that upper and lower case

keys will affect the outcome. It would also be a good idea to write down the key and

all related wireless security settings.

-16-