Philips QT4015 [5/116] English

General

- The appliance is equipped with an automatic voltage selector and is

suitable for mains voltages from 100 to 240 volts.

- The adapter transforms 100-240 volts to a safe low voltage of less than

24 volts.

Charging

Charge the appliance fully before you use it for the rst time.

It takes approximately 1 hour to fully charge the appliance.

When it is fully charged, the appliance has a cordless operating time of up

to 60 minutes.

Note: You can use the appliance cordless as well as connected to the mains.

1 Make sure the appliance is switched off.

2 Insert the appliance plug into the appliance.

3 Put the adapter in the wall socket.

, The charging light starts to ash green to indicate that the appliance

is charging.

, When the battery is fully charged, the charging light lights up green

continuously. After 30 minutes, the charging light goes out.

4 After charging, remove the adapter from the wall socket and pull the

appliance plug out of the appliance.

Battery low

When the battery is almost empty (when there are only 5 or fewer

trimming minutes left), the charging light ashes orange.

Optimising the lifetime of the rechargeable battery

When you have charged the appliance for the rst time, we advise you to

use it until the battery is completely empty. Continue to use the appliance

until the motor almost stops running during a session. Then recharge the

battery. Follow this procedure at least twice a year.

Using the appliance

Always comb the beard and/or moustache with a ne comb before you

start trimming.

When you trim for the rst time, be careful. Do not move the trimmer

too fast. Make smooth and gentle movements.

ENGLISH 5