Singer  1408  [20/62] Sew 4 step buttonholes
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Singer  1408  [20/62] Sew 4 step buttonholes

Singer  1408  [20/62] Sew 4 step buttonholes
17
Sew 4-step Buttonholes
Prepare
Note:
Tips:
1. Take off the all purpose foot and attach the buttonhole foot.
2. Measure diameter and thickness of button and add 0.3cm
(1/8") for bartacks to obtain correct buttonhole length; mark
buttonhole size on fabric (a).
3. Place fabric under the foot, so that marking on the
buttonhole foot aligns with starting marking on fabric. Lower
the foot, so that the buttonhole center line marked on the
fabric aligns with the center of the buttonhole foot .
Density varies according to the fabric.
Always test sew a buttonhole on the fabric you are using
to sew the buttonhole.
Follow the 4-step sequence changing from one step to
another with the Pattern Selector Dial. When moving from
step to step through the buttonhole process, be sure that the
needle is raised before turning the Pattern Selector Dial to
the next step. Take care not to sew too many stitches in
steps 1 and 3. Use seam ripper and cut buttonhole open
from both ends towards the middle.
- Slightly reducing upper thread tension will produce better
results.
- Use a stabilizer for fine or stretchy fabrics.
- It is advisable to use heavy thread or cord for stretch or
knit fabrics. The zig-zag should sew over the heavy thread
or cord. (A)
(b)
Adjust the Stitch Length Dial (model 1409 only) in the " "
range to set stitch density.
A
1
3
4
2
Model 1409 only
2
3
1
4
2
43
1
(a) (b)

Содержание

Похожие устройства

Sew 4 step Buttonholes Prepare 1 Take off the all purpose foot and attach the buttonhole foot 2 Measure diameter and thickness of button and add 0 3cm 1 8 for bartacks to obtain correct buttonhole length mark buttonhole size on fabric a 3 Place fabric under the foot so that marking on the buttonhole foot aligns with starting marking on fabric Lower the foot so that the buttonhole center line marked on the fabric aligns with the center of the buttonhole foot b Adjust the Stitch Length Dial model 1409 only in the BK range to set stitch density Note Density varies according to the fabric Always test sew a buttonhole on the fabric you are using to sew the buttonhole Follow the 4 step sequence changing from one step to another with the Pattern Selector Dial When moving from step to step through the buttonhole process be sure that the needle is raised before turning the Pattern Selector Dial to the next step Take care not to sew too many stitches in steps 1 and 3 Use seam ripper and cut buttonhole open from both ends towards the middle Tips Slightly reducing upper thread tension will produce better results Use a stabilizer for fine or stretchy fabrics It is advisable to use heavy thread or cord for stretch or knit fabrics The zig zag should sew over the heavy thread or cord A 17

Скачать