Beko CG 51010 [40/52] Control pond

Содержание

Oven interior Control pond Oven door Before switching on again ensure that all controls are in the OFF position Take out all trays and the grill out of the oven Clean out the interior with a piece of moist soapy cloth Then clean it once more with a wet piece of cloth and let it to dry Wipe over the control panel with a damp cloth and polish with a dry cloth Do not use oven cleaners or aerosols scouring pads or abrasive powder for cleaning the plastic knobs as damage will occur Do not attempt to remove any of the control knobs from the panel as this may cause damage and is a safety hazard Wipe over the door outer panel with a cloth wrung out in hot soapy water then after wiping with a cloth wrung out in clear water Do not use scouring pads or abrasive powder which may scratch the surface Take care during cleaning not to damage or distort the door seal Do not use dry powder agents for cleaning Special cleaners that are commercially available may be used after carefully reading the warning that are written on the labels Replacing the oven lamp Warning Never clean the inside of the oven and trays with hard brushes steel pads or knives Special cleaners that are commercially avaible may be used after carefully reading the warning that are written on the labels Catalytic enamelled models if available The 1 Unplug the power cable remove theprotective glass cover of the lamp inside your oven by turning it counterclockwise 3 Then remove the bulb by turning it counterclockwise 4 After installing the correct bulb obtained from an Authorized Service reinstall the protective glass of the lamp 2 Then oven interior of this model is coated with catalytic enamel since the catalytic enamel cleans itsellf you do not have to perform an extra cleaning after the cooking operation If your oven obtains steel rack To clean the steel rack unscrew the 4 screws After cleaning operation assemble the steel rack to the oven body again 16

Скачать
Случайные обсуждения