Tp-Link TL-ER5120 Инструкция по эксплуатации онлайн [37/146] 39152

-32-

3.1.4.2 DHCP

The Router with its DHCP (Dynamic Host Configuration Protocol) server enabled can automatically

assign an IP address to the computers in the LAN.

Choose the menu Network→LAN→DHCP to load the following page.

Figure 3-13 DHCP Settings

The following items are displayed on this screen:

¾ DHCP Settings

DHCP Server:

Enable or disable the DHCP server on your Router. To enable the

Router to assign the TCP/IP parameters to the computers in the LAN

automatically, please select Enable.

Start IP Address:

Enter the Start IP address to define a range for the DHCP server to

assign dynamic IP addresses. This address should be in the same IP

address subnet with the Router’s LAN IP address. The default

address is 192.168.0.2.

End IP Address:

Enter the End IP address to define a range for the DHCP server to

assign dynamic IP addresses. This address should be in the same IP

address subnet with the Router’s LAN IP address. The default

address is 192.168.0.254.

Lease Time:

Specify the length of time the DHCP server will reserve the IP address

for each computer. After the IP address expired, the client will be

automatically assigned a new one.