Elenberg RF-0505 [8/10] Installation method

1. The ground should be level, impacted and dry.

2. Avoid placing upside down or horizontal. The angle should be not less

than 45 between the cabinet and the ground when the inclination is nec-

essary.

3. Remain spaces of 30cm above the refrigerator, 5cm both sides and back

to the refrigerator, or it’ 11 make the air circulation improperly, reduce

freezing effect increase energy consumption.

4. Place your refrigerator in where there is less humidity, that can have

electronic insulation and avoid rust.

5. Avoid placing the refrigerator neat heat sources(stove, warmer etc.) or

direct sunshine.

1. To use sole triangle hole socket. Do not share multi-socket together with

the other electric appliances.

2. Do not spatter water inside or outside the refrigerator parts because

they are easy to be out of order or cause electrical shock when touching

water.

3. Avoid taking the power plug with wet hands.

4. Do not put things which temperature is strictly demanded into the

refrigerator.(such as werum vaccine, learning data etc.)

5. Do not put inﬂammable things into the refrigerator. Benzene, ether, liq

uid gas, alcohol, bond etc. Are dangerous to explode.

1. When plug the refrigerator in for the ﬁrst time, let the empty refrigerator

start work until it stops, usually it will take 2 - 3 hours(10 hours when

summer), then adjust the thermostat knob well.

2. Put the accessories on the pointed position according to the feature

drawing.

3. Turn the controller knob to “3 - 4” gear, put the power plug into the

socket.

4. Ice-making pour the cool boiled water into the ice-making box where is

the water lever line. Put the ice-making box into the evaporator. Turn the

controller knob to “1” upside the ice-making box. Ice is made after 2 - 3

hours. Slightly turn round the ice-making box when taking out the ice.

5. Defrost artiﬁcial defrosting is needed when the frost layer of the evapo

rator is about 3 - 4mm, ﬁrst, cut the power off, open the door, take out

the ice-making box and food. The refrigerator begins to defrost. Wipe

and dry the evaporator after the defrosting has ﬁnished. Then return the

food to the original place.

SAFETY CAUTION

HOW TO USE THE REFRIGERATOR

INSTALLATION METHOD