Sven MS-2250 [26/28] Multimedia speaker system

• It is necessary to select the search mode of devices with Bluetooth on a signal source (telephone,

notebook, smartphone, etc.). “MS-2250” message will be displayed on the screen which it should

be connected with*.

• The BLU indicator lights continuously when connection is successful. If there is no any connection,

the lighting of the BLU indicator is intermittent. In this case the system should be switch over to the

search mode once again (to turn off and turn on anew)**.

• It is possible to control the player of a signal source from the remote control or using the button

on the front panel of the subwoofer when connecting to a signal source.

• To auto scan and memorize the found stations, press button e on the front panel or the AUTO n

button on the remote control short. To stop auto scanning, press this button again before the

scanning is over. The display a will show the frequency being scanned. When the channel is being

memorized, the display shows its number for a short moment.

• For manual scanning, use buttons TUNE-/+ c on the remote control (up/down the frequency

range). To save the selected station, press the SAVE r button on the remote control and then,

using buttons c and f on the front panel or buttons d and m on the remote control, assign the

station its number and press the SAVE button again. When the station has been memorized, the

display a will write “Good”.

• If preset stations are available in the memory, you can switch from one to another by short pressing

INPUT

a

Clock Mode

• When the MSS is in the ST-BY mode, the display a shows the current time. When the system is in

a different mode, to see the time, use the CLOCK j button on the remote control. The current time

will show for 3-5 seconds.

q on the remote control long. To enter the time setting mode, press the SET l button on the

remote control (the corresponding position will start blinking on the display a). Set the minutes

ENG

2.1 Multimedia Speaker System

26