Tp-Link TD-8811 Инструкция по эксплуатации онлайн [42/78] 16790

TD-8811 ADSL2+ Modem Router User Guide

After choosing the proper protocol, enter the correct parameters supported by your ISP. Enable

the configurations, and then you will go to the Internet.

)

Note:

The type of network protocol selected may be different in different areas. There are five types

（Figure 4-5）,

so you should ask your ISP to acquire the Connection Type and Encapsulation

Mode.

¾ PPP over ATM (PPPoA)

If you select the protocol of PPP over ATM (PPPoA), you will see the Figure 4-6.

Figure 4-6

 PPP Username: Enter your username for your PPPoA connection to identify and verify

your account to the ISP.

 PPP Password: Enter your password for your PPPoA connection.

 Authentication Method: Choose a method of authentication, AUTO, PAP, CHAP, or

MSCHAP.

 MTU: The default MTU value is 1480 Bytes. It is not recommended that you change the

default value unless required by your ISP. The value should be between 512 and 1500.

 Dial on demand: If you check this box, the Internet connection can be terminated

automatically after a specified inactivity period (Inactivity Timeout) and be re-established

when you attempt to access the Internet again. The default value of Inactivity Timeout is

15. The value should be between 1 and 4320.