Tp-Link TD-8840 Инструкция по эксплуатации онлайн [32/63] 16797

TD-8840 ADSL2+ Modem Router User Guide

Figure 4-9

¾ PPP Username: Enter your username for your PPPoE connection to identify and verify your

account to the ISP.

¾ PPP Password: Enter your password for your PPPoE connection.

¾ PPPoE Service Name: Enter a name for the PPPoE connection for recognition.

¾ Authentication Method: Choose a method of authentication, AUTO, PAP, CHAP, or

MSCHAP.

¾ MTU: The default MTU value is 1480 Bytes. It is not recommended that you change the

default value unless required by your ISP. The value should be between 512 and 1500.

¾ Dial on demand: If you check this box, the Internet connection can be terminated

automatically after a specified inactivity period (Inactivity Timeout) and be re-established

when you attempt to access the Internet again. The default value of Inactivity Timeout is 15.

The value should be between 1 and 4320.

¾ PPP IP extension: If this box is checked, the IP address obtained by the Router will be

assigned to the computer, and the NAT and Firewall will be disabled.

¾ Use Static IP Address: Check this box to use the static IP address to dial. The default value

is disabled.

¾ Enable PPP Debug Mode: Check this box to enable the debug mode. The default value is

disabled.