Sony DSC-J10 Red Инструкция по эксплуатации онлайн [11/80] 39587

1 Press the ON/OFF (Power) button to turn off the camera.

2 Connect the camera to the computer that is turned on with the dedicated

USB connection support cable (supplied).

• The Power/Charge lamp lights up in orange, and charging starts. The Power/

Charge lamp turns off, charging has completed.

• The Power/Charge lamp may turn off when the temperature is outside of the

recommended operating temperature (10°C to 30°C (50°F to 86°F)).

3 When charging is finished, delete the USB connection between the camera

and computer.

• Be careful also of the following points:

– When you connect the camera to a laptop computer that is not connected to an

AC power source, the battery of the laptop computer may be depleted rapidly.

Do not leave the camera connected to the computer for a long time.

– Do not perform start-up, restart, resuming from sleep mode, or shut-down

operations on your computer while the camera is connected. Otherwise the

camera may malfunction. Disconnect the camera from the computer before

performing these operations.

– Charging the battery with customized or hand-built computers is not guaranteed.

Charging time

Full charge time: approx. 150 min.

• Time required to charge a fully depleted battery pack at a temperature of 25°C

(77°F). Charging may take longer depending on conditions of use and

circumstances.

• Besides charging the built-in battery, the supplied AC Adaptor can also be used to

supply power in USB and viewing mode. The camera may not work in shooting

mode because of the voltage reduction the AC adaptor.

Note

Notes

Power/Charge

lamp

Dedicated USB connection

support cable