Sony HVL-F56AM Инструкция по эксплуатации онлайн [22/304] 39588

Test-flash/Modeling flash

You can try one or more test flashes before shooting. This is particularly

convenient for checking shadows in wireless flash photography when the

flash is separated from the camera.

* Modeling flash is used to check shadows on the subject before taking

photos.

1 Set the test-flash mode selection/hold switch to the

desired mode.

HOLD

Flash once at the set light level (LEVEL 1/1 to 1/32).

• Use this test-flash mode when a flash meter is used in manual

flash mode (p. 32).

• In multiple flash mode (p. 46), while pressing the test-flash

button, the flash flashes the number of times you have set.

Flash three times at a rate of two flashes per second (guide

number 5.6 at 24 mm position).

• Used to roughly verify shadows.

Flash 4 seconds at a rate of 40 flashes per second (guide number

1.4 at 24 mm position).

• Convenient for verifying detailed shadows for macro

photography.

The setting prevents incorrect operation.

• All flash operations are locked except the test-flash button and

data panel illuminator. The camera can be operated so you can

take photographs.