Sony HVL-F56AM Инструкция по эксплуатации онлайн [37/304] 39588

Applications

Wireless flash mode (WL)

Photographs taken with the flash attached to the camera are flat as shown

in photo 1. In such cases, remove the flash from the camera and position

it to obtain a more three-dimensional effect as shown in photo 2.

When taking this type of photograph with a single lens reflex camera, the

camera and the flash unit are most commonly connected by a cable. This

flash eliminates the need for a cable to transmit signals to the flash unit by

using the light of the built-in flash itself as a signal. The correct exposure is

determined automatically by the camera.

Normal flash Wireless flash

Wireless Flash Range

The wireless flash uses a light signal from the built-in flash as a trigger to

operate the off-camera flash unit. Follow the points below when

positioning the camera, flash, and subject.

• Photograph in dark locations indoors.

• If you rotate the flashtube using bounce-flash function (p. 24) so that the

wireless control-signal receiver points toward the camera, it will be

easier for the flash to receive a signal from the camera.

• Place the off-camera flash within the gray area in the following diagram.

Continued on the next page