Sony HVL-F56AM Инструкция по эксплуатации онлайн [41/304] 39588

Applications

5 Make sure that the built-in flash and flash are fully

charged.

• is lit in the viewfinder when the built-in flash is fully charged.

• The AF illuminator on the front blinks, and on the rear is lit, when

the flash is fully charged.

6 Use test flash to check the flash.

• The test flash method differs depending on the camera used. For

details, see the operation instructions of your camera.

• If the test flash does not work, change the position of the camera,

flash and subject, or point the wireless control-signal receiver

towards the camera.

7 Check again that the built-in flash and the flash are

fully charged, and press the shutter button to take the

photo.

• Do not take photos when RATIO is displayed on the data panel. The

exposure may not be correct.

Continued on the next page