Sony HVL-F56AM Инструкция по эксплуатации онлайн [49/304] 39588

Applications

8 Press the + or – button to select the power level to set.

• The power level may be selected from the following.

1/8, 1/16, 1/32

9 Press the select button.

10Set the shutter speed and aperture.

• The shutter speed is calculated as follows to suit the selected flash

frequency and number of flashes.

Number of flashes (TIME) ÷ Flash frequency (Hz) ≤ Shutter speed

For example, when ten flashes and 5 Hz are selected, 10 ÷ 5 = 2

requires a shutter speed of longer than two seconds.

11When the flash is fully charged, press the shutter

button to take the photo.

• The distance at which the proper exposure is obtained with a single

flash is displayed on the data panel.

• To prevent shaking, the use of a tripod is recommended during

multiple flash photography.

• Test flash will flash at the selected frequency/number/level while

the test-flash button is being pressed if the selection switch is at or

HOLD.

• The use of custom settings allows the camera to be set up for

manual flash photography without selecting the M mode (p. 54).

Continued on the next page