Sony HVL-F56AM Инструкция по эксплуатации онлайн [58/304] 39588

Temperature

• The flash unit may be used over a temperature range of 0 °C to 40 °C.

• Do not expose the flash unit to extremely high temperatures (e.g. in

direct sunlight inside a vehicle) or high humidity.

• The response of the data panel slows as the temperature decreases, and

the panel darkens at high temperatures. Restore it to normal

temperature if these problems occur.

• To prevent condensation forming on the flash, place it in a sealed plastic

bag when bringing it from a cold environment into a warm

environment. Allow it to reach room temperature before removing it

from the bag.

• Battery capacity decreases at colder temperatures. Keep your camera

and spare batteries in a warm inside pocket when shooting in cold

weather. may blink even when there is some power left in the

batteries in cold weather. Batteries will regain some of their capacity

when warmed to normal operating temperature.

• This flash unit is not waterproof. Be careful not to bring it into contact

with water or sand when using it at the seashore, for example. Contact

with water, sand, dust, or salt may result in a malfunction.

Maintenance

Remove this unit from the camera. Clean the flash with a dry soft cloth. If

the flash has been in contact with sand, wiping will damage the surface,

and it should therefore be cleaned gently using a blower. In the event of

stubborn stains, use a cloth lightly dampened with a mild detergent

solution, and then wipe the unit clean with a dry soft cloth. Never use

strong solvents, such as thinner or benzine, as these damage the surface

finish.