Line6 DL4 [4/10] Loop sampler using your switches

1. MODEL SELECTOR - This is where you pick the model you want to use; it comes up pre-set to a great sound.

2. DELAY TIME - Typically sets the amount of delay time. Check the delay model descriptions for more details.

3. REPEATS - Typicallyadjuststheamountofrepeatsofyourdelayfromonetoinnity.Check the delay model descriptions for more details.

4. TWEAK - This is a special control unique to individual delay models. Check the delay model descriptions for more details.

5 TWEEZ - This is the other special control unique to individual delay models. Check the delay model descriptions for more details.

6. MIX - Thisknobisalwaysusedtosetthemixbetweenthedry/direct/unprocessedsignalandtheprocessedsignal.Turncounterclockwiseformoredrysignal.

7. STOMP SWITCHES -ForallmodelsexceptLOOPSAMPLER,theseswitcheschooseoneofthe3memories.Steponaswitchtogetthesoundthatwasstoredthere.

Tochangewhat’sinamemory,holdoneoftheseswitchesfor3seconds:thatwillstorewhateversoundyouarecurrentlyhearing,soyoucanrecallitbypressingthat

switch.

PLAY ONCE - Thisswitchallows“oneshot”playback(thePlayOnceandPlay/Stoplightscomeonduringoneshotplayback).FromStop,pressthisswitchtoplay

your loop one time and stop. From Record, press Play Once to stop recording and start one shot playback immediately. From Play, this switch will turn on Once mode,

meaningtheloopwillcontinueplayingtotheendoftheloopandstop.IfPlayOnceisalreadyturnedon,pressingthisswitchwillre-triggerthestartoftheloop.(You

can “stutter” with this.) From Overdub, things are the same as from Play: press the switch, and loop playback (and the Overdub) will stop at the end of the loop.

1/2 SPEED/REVERSE - Thisisadualfunctionswitch.Onetapgetsyouhalfspeed,andadouble-tapwillgiveyoureverse.Youcanevenusethembothatthesame

time.