Home
Главная
Line6
Процессор Эффектов
DL4
Stompbox Pilot_s Guide _ English Страница: 8

Line6 DL4 [8/8] Customer service

Customer Service

If you have a question about your Stomp Box Modeler and you are in the USA or Canada, you can contact

Line 6 at (805) 379-8900, 8AM to 5:30 PM Monday through Friday (Pacific Time) and request the Product

Support department (or email them at support@line6.com).

You may also find helpful information on the Support page of the Line 6 web site (www.line6.com). Before

contacting Product Support, please take the time to read through this handbook to see if it can answer your

questions. If you do need to contact Product Support, you will need to tell them your serial number (which

is on a sticker on the back of the your pedal). It might also help to take some notes for yourself before you

call, to insure that you remember everything you want to ask about.

Details of your Stomp Box Modeler’s warranty are at the end of this handbook.

If you are outside the USA and Canada, please contact your Line 6 dealer or distributor directly to arrange

for service.

Special Hidden Functions

Alternate Bypass

The Stomp Box Modelers include mechanically

switching relays that route your signal directly from

input jack to output jack and around all circuitry while

in bypass.

There’s also an alternate bypass mode available that

keeps the DSP engaged while bypassed, so with the

Delay modeler, for instance, your delays can trail

away when you kick the pedal off. If you want this

Alternate Bypass mode, hold the first and third

(from the left) stomp switches while plugging in the

left/mono guitar input. (When the left/mono input

is unplugged, your pedal is powered off.) Your pedal

will remember to stay in this Alternate Bypass mode

until you re-enable True Bypass.

Restoring Factory Presets

The Stomp Box Modelers come pre-programmed with

a set of great tones in their memories. The sounds that

you save replace these factory settings. If you ever want

to recall the factory sounds – and erase the sounds

you might have saved – press the far left and far right

switches while plugging in the left/mono guitar input.

(When the left/mono input is not plugged in, the

pedal is powered off.)

Using the Optional Noise Gate (DM4 only)

While developing the models for the Distortion

Modeler, we thought, “wouldn’t it be cool and oh-

so-21st century to add a noise gate to tame any

annoying single-coil hum, and/or unwanted

non-fuzz noise?” So we did. (But it’s only there if

you really want it.) Follow these steps to enable the

gate on a per preset basis:

1. Starting from bypass mode (= all LEDs OFF),

choose a preset switch (A, B, C or D) and press

it to turn it on and hold the switch to enter the

noise gate select mode.

2. While still holding down the preset switch turn

the Volume knob to set the status of the noise gate

on the preset. (Above 12 o’clock, the noise gate

is On; below 12 o’clock the noise gate is Off.)

3. The LED of the currently selected preset indicates

the status of the noise gate:

• LED lit = noise gate on

• LED unlit = noise gate off

Line6 DL4 [8/8] Customer service

Содержание

Похожие устройства