Aurora AU 066 [4/9] Electric fan heater
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Aurora AU 066 [4/9] Electric fan heater

Aurora AU 066 [4/9] Electric fan heater
AU 066
ENG
4
Electric Fan Heater
Before storing, make sure that the product is disconnected from the mains. Complete all the requirements
of CARE AND CLEANING. Keep the product in a dry, cool place and out of the reach of children.
STORAGE
ADJUSTMENT OF TEMPERATURE
During operation, in minimum and maximum heat-
ing modes, when a comfortable temperature is
reached, slowly turn the thermostat knob counter-
clockwise until the motor shuts down. In the future,
the fan heater will turn on and o automatically,
keeping the temperature selected in the room.
SPECIFICATIONS
Power supply 220-240V ~50/60Hz
Power 1500 Watt
USING THE APPLIANCE
Before connecting the product to the mains,
make sure that the thermostat knob is in the ex-
tremely right minimum position and the mode
selector knob is in the “0” position.
OPERATING MODES
«0» - o
« » - fan mode, air ow without heating
«.» - minimum heating
«..» - maximum heating
Connect the product to the mains. Set the mode
dial to one of three positions. Turn the thermostat
knob clockwise, the motor will turn on and the
operation light will light up.
CARE AND CLEANING
Before cleaning, disconnect the product from the
mains. Make sure the motor is fully stopped. To
clean the case, use a slightly damp cloth, then
wipe it dry. Do not use hard jaws, abrasive clean-
ers or solvents to clean the cabinet. Air inlets, in
order to avoid the accumulation of dust, it is nec-
essary to vacuum with the appropriate nozzle.
AUTOMATIC OPERATION FUNCTION
The product is equipped with an automatic shut-o
function. If the product begins to overheat, an auto-
matic fuse will trip. In this case, immediately turn o
the product by moving the mode switch to “0”, and
unplug the product from the mains. Make sure that
the air grates are free and that nothing interferes with
the ow of air. Re-activation is possible after 20 min-
utes, after the heating element has completely cooled
down. If the product does not turn on again after cool-
ing, this may indicate that the fan heater is damaged.
If the product is accidentally overturned, the protective system will operate. After installing the fan heater
on a at surface, it will automatically turn on.
PROTECTION SYSTEM IN TIPS

Содержание

Похожие устройства

Скачать