Aurora AU 3420 [5/12] Care and cleaning

AU 3420

Electric Steam Iron

ENG

CARE AND CLEANING

STORAGE

SPECIFICATIONS

Before cleaning the appliance make sure it is unplugged from the power supply and has completely

cooled down. To clean the exterior of your iron, wipe over with a damp soft cloth and wipe dry. Never use

harsh abrasives to clean the soleplate as these will damage it.

Empty the water tank and wind the power cord around the heel rest. To protect the soleplate from scratch-

ing, corroding or staining, always place the steam iron in an upright position on its heel rest.

Power source 220-240V ~50 Hz

Power 2000 Watt

DRY IRONING

The steam iron can be used on the dry setting

with or without water in the water tank, however

it is best to avoid having the water tank full while

dry ironing. Turn the variable steam control to the

minimum position.

ANTI-DRIP FEATURE

This iron is equipped with an anti-drip feature

that protects fabrics from water spotting even at

low temperatures.

DESCALING

Fill the tank with water up to the maximum mark,

close the lid. Connect the iron to the mains set

the «MAX» temperature using the thermostat.

After the sole heats up, switch o the iron from

the mains. Hold the iron horizontally over the

sink, press the «Self-clean». Steam and hot water,

based on the nozzle, remove dirt. It should shake

the iron back and forth. If heavily soiled iron re-

peat the self-cleaning cycle. To dry the soleplate,

iron the piece of used cloth.

WHEN YOU FINISHED IRONING

Set the iron vertically. Turn the temperature con-

trol dial to “Min”. Unplug the iron from the power

supply. Let it cool down completely. Wind the

cord. Store the appliance vertically, to avoid dam-

aging the surface.

CAUTION! Empty the iron’s water tank after each

use.