Home
Главная
Aurora
Утюг
AU 3432
Инструкция по эксплуатации Страница: 10

Aurora AU 3432 [10/12] Electric steam iron

AU 3432

ENG

Electric STEAM IRON

USING THE APPLIANCE

TEMPERATURE SETTINGS

Before you begin, check the clothing label for spe-

cic ironing instructions and fabric composition.

Sort garments according to the dierent heat set-

tings required: wool to wool, cotton to cotton, etc.

The iron heats up much faster than it cools down.

Thus, iron fabrics that require lower temperatures

rst, and then iron the items compatible with

higher temperature settings. Iron blended fab-

rics at settings for the lower-temperature ber.

For example, the fabric is 60% polyester and 40%

cotton; you must choose the ironing temperature

for polyester. Turn the temperature knob to the

position in accordance with the type of fabric to

be ironed.

WATER TANK FILLING

Before lling the water tank ensure the plug is

removed from the power outlet. Carefully pour

water into the water inlet until the maximum wa-

ter level is reached. Do not exceed the maximum

water level indicator. When ironing, make sure to

unplug the appliance from the power outlet be-

fore relling.

BODY POSITION WHILE IRONING

While ironing, keep your back straight. Set the

ironing board so that the handle was on a par

with the elbow. When the temperature is set cor-

rectly, there is no need to press hard on the iron.

For best results, iron your clothes slightly damp.

STEAM IRONING

Switch the temperature control dial to “••” or “•••”

position. Push the steam button.

NOTE! In order to prevent water leakage from the

soleplate, please do not press the steam button

continuously for more than 5 seconds.

SPRAYING

As long as there is enough water in the water

tank, you may use the spray button at any tem-

perature setting during steam or dry ironing.

Press the spray button several times to activate

the pump while ironing.

BURST OF STEAM

The burst of steam feature provides additional

steam for removing stubborn wrinkles. Turn the

temperature control dial to the “••” or “•••” posi-

tion. Turn the variable steam control to the maxi-

mum position. Press the steam burst button.

VERTICAL STEAM

Ensure that there is enough water in the water

tank. Place the steam iron on its heel rest and

plug it. Set the temperature control dial and vari-

able steam control to their maximum positions.

Hold the iron vertically and press the steam burst

button.

The anti-drip feature automatically activates to

prevent vaporization, so that you can iron the

most delicate fabrics without risk of spoiling or

staining them.

Plug the iron into an outlet. The indicator light will turn on. Set the temperature by turning the tempera-

ture control dial to adequate choice. When the light turns o, you may start ironing.

When the temperature is changed from a high setting to a lower temperature setting during ironing, the

indicator light will go out immediately. It is not recommended to iron before the light comes on again.

Aurora AU 3432 [10/12] Electric steam iron

Содержание

Похожие устройства