Aurora AU 193 [10/12] Using the device
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Aurora AU 193 [10/12] Using the device

Aurora AU 193 [10/12] Using the device
USING THE DEVICE
Setting the temperature
Remove the protective cover from the working
surface of the iron and wipe with a damp cloth.
Before you begin, refer to the instructions of
ironing to a specic type of tissue.
Collect the product on the composition of ber,
depending on the ironing temperature: wool to
wool, cotton for cotton, etc. The heating of the
iron is faster than cooling. So, start ironing your
lowest temperature of ironing. Then move on to
other products.
If the fabric consists of various kinds of ber, you
need to begin the process of ironing
the lowest temperature of iron for example, the
fabric is 60% polyester and 40% cotton. You must
choose an ironing temperature for polyester). Turn
the temperature at the position in accordance
with the type of fabric, which is ironed.
FILLING THE WATER TANK
Before lling the iron with water unplug the
appliance. Carefully ll the reservoir with water. To
prevent overow, did not pour water on the label
above the tank. If you wish to add water during
ironing, rst unplug the unit from the mains.
NOTE: To ll the tank using tap water.
CHOICE OF BODY
When ironing stroke, keeping your back straight.
Set the height of the timber so that the handle
was an iron on a par with his elbow.
When properly selected temperature is not
necessary to press hard on the iron. Best results
are achieved if the laundry is wet.
SPRAYING
Spraying can be used at dierent temperatures
and dierent modes of operation of the device, if
the tank is sucient water.
To use this feature, click rozbryzgivaniya several
times.
STEAM
Turn the knob to the “..” or “...”. Click steaming.
Caution: To prevent leakage of water from the
steam holes, hold the steam press is not more
than 5 seconds.
STEAM HIT
This function is used for a single additional steam
when ironing a crumpled seats.
Set the thermostat in position “• •” or “• • •”.
Set the level of steam in the maximum position.
Click steaming.
VERTICAL STEAMING
Make sure you have enough water tank. Connect
the unit to power and place it vertically.
Set the thermostat knob and the degree of steam
in the maximum position.
Hold the iron vertically, press the steam.
Leakage protection function automatically
prevents the formation of droplets, allowing
ironing delicate fabrics without the risk of damage
or zaplyamyty them.
Plug the iron into an outlet. The indicator lights.
When the light goes o, you can follow any responses to begin ironing.
If you set the temperature lower than where you are stroked, it is not recommended
begin stroking until the light comes on again.
AU 193
Праска \ Утюг \ Iron
10
ENG

Содержание

Похожие устройства

Скачать