Tp-Link TL-WR700N [46/175] Wireless statistics

TL-WR700N 150Mbps Wireless N Mini Pocket Router

- 40 -

¾ Transmit Power - Here you can specify the transmit power of Router. You can select High,

Middle or Low which you would like. High is the default setting and is recommended.

¾ Beacon Interval - Enter a value between 20-1000 milliseconds for Beacon Interval here.

The beacons are the packets sent by the Router to synchronize a wireless network. Beacon

Interval value determines the time interval of the beacons. The default value is 100.

¾ RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet

is larger than the specified RTS Threshold size, the Router will send RTS frames to a

particular receiving station and negotiate the sending of a data frame. The default value is

2346.

¾ Fragmentation Threshold - This value is the maximum size determining whether packets

will be fragmented. Setting the Fragmentation Threshold too low may result in poor network

performance because of excessive packets. 2346 is the default setting and is

recommended.

¾ DTIM Interval - This value determines the interval of the Delivery Traffic Indication Message

(DTIM). A DTIM field is a countdown field informing clients of the next window for listening to

broadcast and multicast messages. When the Router has buffered broadcast or multicast

messages for associated clients, it sends the next DTIM with a DTIM Interval value. You can

specify the value between 1-255 Beacon Intervals. The default value is 1, which indicates

the DTIM Interval is the same as Beacon Interval.

¾ Enable WMM - WMM function can guarantee the packets with high-priority messages being

transmitted preferentially. It is strongly recommended enabled.

¾ Enable Short GI - This function is recommended for it will increase the data capacity by

reducing the guard interval time

¾ Enabled AP Isolation - This function isolate all connected wireless stations so that wireless

stations cannot access each other through WLAN. This function will be disabled if

WDS/Bridge is enabled.

)

Note:

If you are not familiar with the setting items in this page, it's strongly recommended to keep the

provided default values; otherwise it may result in lower wireless network performance.

4.6.5 Wireless Statistics

Choose menu “Wireless → Wireless Statistics”, and then you can see the MAC Address,

Current Status, Received Packets and Sent Packets for each connected wireless station.