Hottek HT-960-002 [12/22] Attention

ENG

Before rst use

• Remove all packaging materials (stickers, labels, packages, etc.) prior

to rst use.

• Before using the kettle, pour water into the kettle, boil it, and then drain

it. Do this several times. Every time ll the kettle with fresh, cold water

to the maximum point.

• To ll the kettle with water turn on the tap and let the water run for 1-2

minutes before ll it into the kettle.

• Always pull out the plug from the socket, if you ll up or add water into

the kettle without taking it off the stand.

Using the appliance

• Place the stand on a dry, solid, and horizontal surface.

• Fill the kettle with the required amount of water. Check the water level

on the scale (6) on the kettle body. Make sure that the water level is

between the minimum and maximum points.

• The amount of water less than 0.5 liter (below the minimum level) can

lead to water boil-off, heating and breaking the empty kettle.

• The water exceeding the maximum point (1.7 L) will be splash out when

boiling.

• Make sure that the kettle cover (3) is closed correctly and rmly, other-

wise the kettle does not switch off automatically.

• Put the kettle on the stand. The base of the kettle has to t exactly into

the stand.

• Pull the plug into the socket.

• Turn the “O/I” switch (5) to position “I”, after that the illumination will light

up and heating will begin.

• Do not touch any parts of the kettle, except for the handle.

• When the water boils, the illumination will put out and the kettle will shut

off automatically. The switch “O/I” (5) will return automatically to position

“O”. The kettle can be turned off manually by moving the switch to “O/I”

(5) to position “O”.

• Take the kettle off the stand and pour the water into the cups carefully.

The kettle must be switched off.

Attention!

It is strictly prohibited to switch on the kettle without water!