Hottek HT-979-001 [10/16] Cleaning and maintenance

ENG

• Put down the loading lever (4), after what the toaster will automatically

switch on.

• During cooking, you can control the degree of toasting. If the toasts have

reached your desired degree of toasting, you can interrupt preparation pro-

cess and turn off the appliance by pressing the cancel button (6).

• If the toaster works continuously for a long time, the preparation time for

each subsequent batch of toasts will be reduced.

• To prepare one toast you need less time than to make two toasts when

choosing the same temperature mode.

• After the toasting, the toaster will automatically turn off, and the loading lever

(4), together with bread slices will raise up to their original position.

• Additional lifting of the load lever (4) upwards can facilitate the process of

toasts removing from the appliance.

Stop function

• You can stop toasting at any time by pressing the stop button (6), while the

loading lever (4) returns to its original position.

Crumb tray

This toaster model is equipped with a crumb tray (2).

• It is recommended to clean the tray (2) every time after using the appliance.

Cleaning and Maintenance

• Unplug the appliance from the electric outlet before cleaning.

• Wipe appliance body (1) with a damp cloth.

• Always ensure that the toaster is unplugged and has cooled down before

removing the crumb tray. Clean the crumb tray with a damp cloth and always

dry the tray properly before replacing it into the toaster.

• Do not use aggressive or abrasive cleaning agents.

• Never immerse the appliance in water or any other liquid.

Storage

• Unplug the appliance from the electric outlet. Clean the appliance.

• Store the appliance in a clean, dry childproof place.

• Do not wrap the power cord around the appliance.

• Electrical equipment have to be stored in a dry place at ambient temperature

no higher than plus 40 °C with a relative humidity of 70%, and the absence

of dust, acid and other fumes in surrounding medium which affect adversely

the materials of the electrical devices.