D-Link DGS-3420-52P [95/338] Config stp mst_ports

DGS-3312SR Layer 3 Gigabit Switch

config stp mst_ports

are two options:

 auto – Selecting this parameter for the

internalCost will set quickest route automatically and

optimally for an interface. The default value is derived from

the media speed of the interface.

 value 1-2000000 – Selecting this parameter with

a value in the range of 1-2000000 will set the quickest route

when a loop occurs. A lower internalCost represents a

quicker transmission.

priority <value 0-240> - Enter a value between 0 and 240 to set

the priority for the port interface. A higher priority will designate the

interface to forward packets first. A lower number denotes a

higher priority.

Restrictions Only administrator-level users can issue this command.

Example usage:

To designate ports 1 through 5 on module one, with instance ID 2, to have an auto internalCost and a priority of 16:

DGS-3312SR:4#config stp mst_config_id ports 1:1-1:5 instance_id

2 internalCost auto priority 16

Command : config stp mst_config_id ports 1:1-1:5 instance_id 2

internalCost auto priority 16

Success.

DGS-3312SR:4#

show stp

Purpose Used to display the Switch’s current STP configuration.

Syntax

show stp

Description This command displays the Switch’s current STP configuration.

Parameters None.

Restrictions None.