Sven SPS-710 [26/28] Multimedia speaker system with bluetooth

2.0 Multimedia Speaker

System with Bluetooth

ENG

Clock Mode

• When the MSS is in the ST-BY mode, the display shows the current time. When the system is in

another mode, use the TIME button on the remote control to see the time. The current time will be

displayed for 3-5 seconds.

• To set the current time from the remote control:

Switch to «ST-BY» mode. Enter the time setting mode by long pressing the TIME button (the

corresponding digit will blink on the display). Set the required hour with the buttons

, . Switching

between the hour / minute settings and exit from the setting mode is performed by pressing the

AUTO button.

• To set the current time from the control panel:

Turn on MMS, to press M button several times switch to the clock mode. Long press

button (the

corresponding digit will ash on the display). Set the required hours with the buttons

, . Switching

between setting hours / minutes and exiting setup mode is done by pressing a button

Alarm Mode

• To set the alarm with the remote control:

Switch to ST-BY mode. Spend setting hours, after the process of setting the alarm. The alarm time

will ash on the display. Set the desired value of the clock buttons

, , after press the button ,

then set the required minutes using the buttons

, , next press button , then turn on / o the

alarm with the buttons , . Exit setup mode with the button .

• To set the alarm from the control panel:

Turn on the speakers, switch to the alarm mode by pressing several times M button. Press long

button (the corresponding digit will ash on the display). Set the required hours with the buttons

, , then press button , then set the required minutes using buttons , , after that press button

, then turn on / o the alarm with the buttons , . Exit setup mode by pressing button .

When the alarm is on, a white LED lights up to the right of the display.

SLEEP Mode

• The SLEEP mode enables to switch over the device in the ST-BY mode after a lapse of time chosen

by a user. Press the SLEEP button on the control panel to enter the SLEEP mode.