Vitek VT-3521 Black [5/24] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-3521 Black [5/24] English

Vitek VT-3521 Black [5/24] English
5
E N G L I S H
Alarm snooze
•
You can switch off the alarm signal for 9 minutes by
pressing the button (8) «SNOOZE/SLEEP/DIMMER».
The indicator of the selected alarm will be flashing, the
alarm signal will be repeated in 9 minutes.
•
To switch the alarm sound signal off, press the button
(9) «
».
Note
The alarm/radio signal will sound during 30 minutes if you
do not press any buttons.
Display brightness setup
•
Set up the necessary display brightness by pressing
the button (8) «SNOOZE/SLEEP/DIMMER» repeatedly
in the current time mode.
Sequential displaying mode
You can switch on sequential displaying of current time,
year and current date.
•
To activate this function in the time mode (radio is off),
press and hold the button (2) «∆» until the symbol «on»
appears on the display.
•
To switch the sequential displaying mode off, press and
hold the button (2) «∆» until the symbol «OFF» appears
on the display.
Radio stations reception
•
Connect the unit to the mains and press the button (9)
«
».
•
Use the buttons (3) «◄◄» and (4) «►►» for tuning to
the desired radio station.
Manual tuning: consequently press the buttons (3) «◄◄»
and (4) «►►» to select the desired radio station with the
step of 0.1 MHz in FM mode.
Auto tuning: press and hold the button (3) «◄◄» and (4)
«►►» for more than 2 seconds. The tuner will begin scan-
ning and automatically stops scanning after finding the
closest strong radio station signal.
•
Press the button (9) « » to switch the radio off.
Antenna (14)
Select the wire antenna (14) position for quality reception
of radio signal.
Volume level adjusting
Use buttons (1) and (2) to set up the desired volume level.
Radio stations programming
You can tune in to and save 10 radio stations in FM band.
•
Tune to the station you want to program.
•
Press and hold the button (7) «
¹
/MEM/M+» until a
flashing symbol of «P01» appears.
•
Consequently press the buttons (3) «◄◄» or (4) «►►»
to select the number of the programming cell.
•
Press the button (7) «
¹
/MEM/M+» again to save the
settings.
•
Repeat steps 1-4 for all radio stations which you wish to
save in the clock radio memory.
•
To select one of the pre-programmed radio stations,
press the button (7) «
¹
/MEM/M+» in radio mode con-
sequently.
Sleep timer
You can set up the radio switch off time.
•
Press the button (8) «SNOOZE/SLEEP/DIMMER» in
radio mode. The symbols «90» and «sleep» will appear
on the display, that means automatic switching off of the
radio in 90 minutes.
•
Set up the necessary auto switch off time (90, 60, 30 or
15 minutes) pressing the button (8) «SNOOZE/SLEEP/
DIMMER » repeatedly.
•
To cancel this function, press the button (8) «SNOOZE/
SLEEP/DIMMER» repeatedly until the «sleep» symbols
disappear from the display or switch the radio off by
pressing the button (9) « ».
Notes
Electromagnetic interference can influence operation of
the unit. In this case disconnect the unit from the power
sources, and then connect again.
If necessary, move or relocate the unit.
Thermometer function
Temperature view
To view the built-in thermometer readings, press the button
(4) «►►/TEMP/C-F».
To change temperature measurement units (C/F) in tem-
perature view mode, press and hold the button (4) «►►/
TEMP/C-F».
Note
The temperature range in the room should be from 0°C to +
50°C or from 32°F to 122°F.
Cleaning and care
•
Unplug the unit before cleaning.
•
Use a soft cloth to clean the unit.
•
Do not use liquid or aerosol substances for cleaning.
Storage
•
Clean the unit before taking it away for storage.
•
Keep the unit away from children in a dry cool place.
Delivery set
Clock radio – 1 pc.
Instruction manual – 1 pc.
Technical specifications
Power supply: 220-240 V ~ 50 Hz
Backup power supply: «CR2032» battery, 3 V
FM frequency range: 87,5 MHz –108 MHz
The manufacturer preserves the right to change the speci-
fications of the unit without a preliminary notification
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be obtained
from the dealer from whom the appliance was purchased.
The bill of sale or receipt must be produced when making
any claim under the terms of this guarantee.
This product conforms to the EMC-Requirements as
laid down by the Council Directive 2004/108/ЕС and
to the Low Voltage Regulation (2006/95/ЕС)
VT-3521.indd 5 19.02.2014 17:48:06

Содержание

Похожие устройства

Скачать