Home
Главная
Fubag
Бензиновая Мотопомпа
PTH 1000ST для загрязненной воды 838217
Инструкция по эксплуатации Страница: 12

Fubag PTH 1000ST для загрязненной воды 838217 [12/26] Page11

Содержание

Похожие устройства

Fubag Operator s manual www fubag ru 7 Cleaning and Preparation for storage 1 Remove all dust and particles around the exhaust silencer 2 Clean the motor pump especially the air inlets outlets of the engine with a cloth and a brush 3 Check the general condition of the motor pump and if change any defective parts If the pump is not used for a long period of time it must be stored in accordance with the following guidelines 1 Unscrew the pump drain plug and empty the pump housing 2 Clean the inside of the pump housing cover with a waterjet 3 Screw the pump drain plug back on 4 Drain the fuel through the filler neck of the fuel tank 5 Withdrawthe spark plug pour a maximum of 15ml of oil into the cylinderthen refit the spark plug 6 Slowly pull the recoil starter handle several times until encountering resistance allow it to return back gently so that the oil is distributed throughout inside the cylinder 7 Clean the outside of the motor pump apply an anti rust product over the damaged areas 8 Cover the motor pump with a drop cloth to protect it from dust and store it in a clean and dry location 8 Trouble Shooting FAULT Engine not starting Engine shutdown Priming failure Low flow REMEDY POSSIBE CAUSE Clean the air filter Air filter clogged up Fuel tap closed Open the fuel tap Fuel level too low Fill up with fuel Clean the fuel filter ________Fuel filter clogged up ________ Oil level too low Check the oil level and top up if necessary Fuel supply blocked or leaking Have it checked repaired or replaced ________ Spark plug defective ________ Check the spark plugand replace if necessary Blocked ventilation inlets Clean the air inlet and outlet guards Fill up with fuel Fuel level too low Oil level too low Check the oil level and top up if necessary Level of liquid being pumped is too low Immerse the strainer completely Water level in the pump casing too low Add water in the pump casing Pump drain plug not screwed on Tighten the pump drain plug properly Air coming in through the suction side Check the pipe suction side _____ Engine not running properly _____ Have it checked repaired or replaced Air coming in through the mechanical Have it checked repaired or replaced joint Shorten or stretch the pipe ________ Pipe too long or bent ________ _____ Suction side is too high up ______ _______ Lower the height of operation _______ Air coming in through the suction side Check the pipe suction side Repair the leak ______Liquid leaking in the pipes ______ _________ Wheel clogged up_________ Have it checked repaired or replaced Wheel worn Have it checked repaired or replaced Mechanical joint broken Have it checked repaired or replaced Engine power loss Have it checked repaired or replaced Operation s to be entrusted to one of our agents 11

Скачать