Tp-Link TL-WA5210G [95/114] Wireless settings

5.8 Wireless settings

Selecting Wireless Settings will allow you to do some advanced settings for the device in the

following screen shown in Figure 5-23.

Figure 5-23 Wireless settings

¾ Enable WMM - WMM function can guarantee the packets with high- priority messages being

transmitted preferentially. It is strongly recommended enabled.

¾ Enable AP Isolation - Isolate all connected wireless stations so that wireless stations can

not access each other through WLAN. This option is available only for AP mode.

¾ Disable short preamble - Disable short preamble and use long preamble only. 802.11b

mode supports only long preamble and this parameter will be ignored. It is recommended that

you do not change these settings.

¾ RTS threshold - RTS/CTS Threshold, the packet size that is used to determine if RTS/CTS

should be sent.

¾ Fragmentation Threshold - The maximum packet size used for fragmentation.

¾ Beacon Interval - The interval time between two successive beacons.

¾ Power - The transmit power of the access point. The checkbox determines the transmit

power that whether it obeys regulatory power or not. Un-checking the Obey Regulatory

Power option may cause interference to other devices and violate the applicable law.

¾ Antenna Settings -The polarization of an antenna.

¾ Signal LED Thresholds - The RSSI thresholds of the signal LEDs.

5.9 SNMP

SNMP will allow the network management station to retrieve statistics and status from the SNMP

agent in this device. Simple Network Management Protocol (SNMP) is a popular network

monitoring and management protocol, used to refer to a collection of specifications for network

management that include the protocol itself. To use this function, select Enable and enter the