Home
Главная
Timberk
Воздухоувлажнитель
Galaxy THU UL 09 (W)
Инструкция по эксплуатации Страница: 6

Timberk Galaxy THU UL 09 (W) [6/20] Appliance operation

www.timberk.com • electric humidifier

The delivery set includes three cartridge filter with balls of mineral stone,

which has a strong absorption properties. Filter disinfects water, absorbs

the elements of heavy metals such as lead, chromium, mercury, zinc, etc.

Restores the normal acidity of the water (PH).

Filter service life is 4-6 months, depending on the quality of water used and

the frequency of use of the device.

If white marks appear on objects around the moistener, when the air

humidifier is used, this may be caused by the following:

1. Used water contains much magnesium or calcium. It is necessary to use

water pretreated in a household water filter or distilled water removing the

filter beforehand.

2. Remains of calcium and manganese salts accumulated inside the

appliance. It is necessary to clean the appliance inside.

8. СARTRIDGE FILTER FOR WATER SOFTENING

in the delivery set.

Automatic cut-out in the absence of water

Upon fall of water level in the reservoir lower minimum allowed the ultrasound

membrane of the device cuts out automatically. The red detector lights up

on the control panel. To continue the device functioning it is necessary to

fill the reservoir with water in accordance with the paragraph 5 Filling the

reservoir with water (pic. 1), then connect the appliance to the power line.

Note!

Disconnecting the appliance from the power line when it automatically

switches off due to no water is mandatory.

USEFUL INFORMATION!

Dear Customer,

When using the air humidifier, you may come across

condensate formation on its upper part and things

beside it, including water accumulation, which is not

a defect, but a feature of this model due to its unique

design. This feature may be related to several causes,

specified in the table 2 on page 7.

7. APPLIANCE OPERATION

- On/ Off

- Maximum capacity

- Night mode

- Water reservoir backlighting and air ionization function switch

Switching on/off, control of steam escape intensity

Plug the appliance. Before that, fill the tank with water. Turn the on-and-off

and steam escape intensity controller to the right ( ).

The appliance will switch on, the indication light will flash and steam will

come out from the diffuser. In the very beginning of this operation the

diffusion level may be unstable, which is caused by temperature difference

and water quality. Stabilization of this process will take a short time.

Turning the controller to the right and to the left, you may control the steam

intensity. Higher intensity of steam escape results in stronger and faster air

humidification.

Night mode

To choose the night mode set the turn on / turn off and steam outflow rate

controller to the position « »

In night mode the device operates with less noise and intensity. Depending

on the ambient temperature, humidification capacity may vary from 80 to

100 ml/h

Relative air humidity for comfortable conditions should be between 40

and 60%. You may define a favourable humidity level on the basis of your

own feelings or use a special device - hygrometer*, measuring a relative

humidity level.

To enable or disable the ionizer press the appropriate button (5).

The ionizer generates negative ions (anions) and refreshes the air in the

room. Anions strengthen the nervous and circulatory systems, improve the

lungs and provide effective protection against respiratory illnesses (such as

asthma and pneumonia). Anions purify the air of dust and smoke.

Air flavouring

The appliance is equipped with a chamber for aromatic oil. When the

aromatic oil is added, the air will be flavoured. Aromatic oil is not included

Timberk Galaxy THU UL 09 (W) [6/20] Appliance operation

Содержание

Похожие устройства