Philips HX8274/20 [11/36] Using the appliance

Tip: For the best result and a fresher experience, we advise you to

use mouthwash with your AirFloss.

Note: Do not use mouthwash that contains isopropyl myristate

(e.g. Dentyl Active or high concentrations of essential oils, as it

may damage the appliance. This includes all mouthwash sold in

glass and ceramic packaging.

4 Close the cover of the reservoir by pressing (‘click’) (Fig. 8).

5 Press the power on/off button to switch on the appliance. (Fig. 10)

The green charge indicator lights up.

6 Press and hold the activation button until spray comes out of the

tip of the nozzle. (Fig. 9)

Using the appliance

1 Make sure the AirFloss is switched on. (Fig. 10)

2 Place the tip between the teeth and apply gentle pressure. Slightly

close your lips over the nozzle when it is in place, to avoid

splashing. (Fig. 11)

Tip: Use your finger to press the activation button.

Note: The AirFloss is intended to be used on the front/outside

surface of the teeth only.

3 Press the activation button to deliver a single burst of air and

microdroplets of mouthwash or water between the teeth.

Alternatively, hold the activation button to deliver continuous

bursts of mouthwash or water approximately every 1 second.

(Fig. 12)

4 Slide the guidance tip along the gum line until you feel it settle

between the next two teeth.

5 Continue this procedure for all spaces including behind your back

teeth. (Fig. 13)

6 To switch off the AirFloss, press the on/off button again.

Automatic shut-off function

The automatic shut-off function automatically switches off the

AirFloss if it has not been used for 4 minutes.

English