Vitek VT-3652 [4/32] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-3652 [4/32] English

Vitek VT-3652 [4/32] English
4
ENGLISH
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, ITS COMMERCIAL USAGE AND USAGE
IN PRODUCTION AREAS AND WORK SPACES IS
PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage at low tem-
perature keep it for at least 3 hours at room
temperature before switching on.
• Unpack the juice extractor and remove all
packaging materials that can prevent unit
operation.
• Check the unit for damages, do not use it in
case of damages.
• Before plugging the unit in make sure that the
operating voltage of the unit corresponds to
the voltage of your mains.
Disassemble and clean the juice extractor
before usage:
•
Remove the pusher (1) from the lid (3) feeding
chute (2).
•
Lower the lock (7) and remove the lid (3).
•
For easy removal of the grating filter (4) remove
the grating filter with the juice collector (5) hold-
ing the juice collector (5) and pulling it upwards.
•
Wash thoroughly and dry all the removable parts
(1, 3, 4, 5, 11) that will contact products.
Note: Be cautious when holding the grating fil-
ter (4) in your hands, as the disc grating surface is
very sharp.
MAKING JUICE
Before the first plugging in make sure that
the operating voltage of the unit corresponds to the
voltage of your mains.
Fruit and vegetables meant for processing must
be fresh.
Before juice extracting wash fruit/vegetables,
remove inedible parts from vegetables or fruit, such
as stems, hard peel or stones, for example, of
cherry or peach, cut them into pieces easily fitting
into the feeding chute (2).
•
Place the motor unit (8) on a dry, flat and steady
surface.
•
Before unit assembling make sure that the oper-
ation mode switch is set to the position «0», and
the plug is not inserted into the mains socket.
•
Set the juice collector (5) on the motor unit (8).
•
Install the grating filter (4) into the juice collec-
tor (5).
ATTENTION!
Do not use the juice extractor if you find mechanical
damages of the grating filter (4).
•
Set the pulp container (10) behind the juice
extractor.
• Install the lid (3) on the juice collector (5);
when installing the lid (3) make sure that the
rear part of the lid (3) matches the juice coll-
ector (5) grooves and fix it with the clamp (7).
•
Set the juice cup (11) under the juice draining
spout (6).
•
Insert the power plug into the mains socket.
•
Switch the juice extractor on by setting the
switch (9) to the position «I» (low speed), posi-
tion «II» (high speed) or position «P» (pulse
mode).
Notes:
Low speed «I» is intended for extracting juice
from soft vegetables/fruits, such as tomatoes,
ripe pears, strawberries, oranges, plums, grapes,
pumpkins, onions, cucumbers etc.
High speed «II» is intended for extracting juice
from hard vegetables/fruits, such as artichoke,
carrot, apples, capsicum, beet, potatoes, pine-
apples, vegetable marrows, celery, spinach, dill,
leek etc.
«P» is pulse mode, switching the juice extractor on
for a short time.
ATTENTION!
To avoid the grating filter (4) stopping and
motor rotor jamming during the processing of
viscous or quite hard food it is recommended
to use the high speed operation mode «II» of the
juice extractor.
•
The unit will be switched on only if all the remov-
able parts are installed properly, and the lid (3)
is fixed with the lock (7).
•
Feed fruit/vegetable pieces into the lid (3) feed-
ing chute (2) only when the grating filter (4) is
rotating.
•
Gradually put vegetables or fruits cut before-
hand into the lid (3) feeding chute (2) and push
them gently with the pusher (1). Do not press
on the pusher (1) too hard as it can lead to
decrease of juice amount as well as stop the
grating filter (4) rotation. The slower is the fruit
and vegetables processing, the higher is the
juice extraction rate.
•
Do not put your fingers or any other foreign
objects into the lid (3) feeding chute (2).
•
During operation, check the grating filter (4)
periodically for obstruction of the mesh with
pulp, if necessary wash the grating filter (4);
before removing the grating filter, switch the
juice extractor off and unplug it.
•
Control the pulp container (10) filling, if the con-
tainer (10) is filled up, switch the juice extrac-
IM VT-3652.indd 4 19.01.2018 15:44:22

Содержание

Похожие устройства

Скачать